dimanganese decacarbonyl
A
sodium tetrafluoroborate
B
(OC)3Fe(μ-η4:η1-cyclohexadiene)Mn(CO)5
Conditions | Yield |
---|---|
With sodium amalgam In tetrahydrofuran (Ar), reduced Mn-complex (45 min at 0°C, 30 min at 20°C) added at -70°C, stirred for 1 h; solvent removed in vacuo at -30°C, extracted four times with pentane at -25°C (Mn2(CO)10 as by-product), extracted two times with CH2Cl2, solvent removed, dried in high vacuum, (all steps at <-20°C), elem. anal.; | A n/a B 98% |
Conditions | Yield |
---|---|
With BF3 In tetrahydrofuran introduction of BF3 into suspn. of NaBH4 in THF with stirring (-8-(-12)°C, 6 h), stirring (12h, room temp.), addn. of further NaBF4, stirring (2 h); condensing in to N2 cooled Dewar-vessel (25°C, 50 Torr), warming (room temp.); (11)B-NMR; | A n/a B 97.5% |
Conditions | Yield |
---|---|
In further solvent(s) soln. NaBH4 in triglyme was added slowly for 1 h at room temp. to BF3-triglymate; B2H6 was absorbed with THF, NaBF4 was filtered off, solvent was removedby distillation to obtaine more NaBF4; | A 97% B >99 |
C6H4FN2(1+)*C6BF8(1-)
A
sodium tetrafluoroborate
B
para-difluorobenzene
Conditions | Yield |
---|---|
at 160 - 170℃; Glovebox; | A 5% B 95% C 83% D 10% |
sodium tetrahydroborate
BF3-monoglymate
A
sodium tetrafluoroborate
B
diborane
Conditions | Yield |
---|---|
In further solvent(s) soln. NaBH4 in triglyme was added slowly for 3 h at room temp. to BF3-monoglymate; B2H6 was absorbed with THF, NaBF4 was filtered off, solvent was removedby distillation to obtaine more NaBF4; | A 94% B >99 |
Conditions | Yield |
---|---|
In further solvent(s) soln. NaBH4 in tetraglyme was added slowly for 3 h at room temp. to BF3-tetraglymate; B2H6 was absorbed with THF, NaBF4 was filtered off, solvent was removedby distillation to obtaine more NaBF4; | A 94% B >99 |
Conditions | Yield |
---|---|
In water addn. of NaOH to C5H5NHBF4; extn. of pyridine with CHCl3, concn., elem. anal.; | A n/a B 94% |
sodium tetrahydroborate
BF3-tert-butyl methyl etherate
A
sodium tetrafluoroborate
B
diborane
Conditions | Yield |
---|---|
In further solvent(s) soln. NaBH4 in triglyme was added slowly for 3 h at room temp. to BF3-tert-butyl methyl etherate; B2H6 was absorbed with THF, NaBF4 was filtered off, solvent was removedby distillation to obtaine more NaBF4; | A 93% B >99 |
sodium methylate
A
sodium tetrafluoroborate
B
[Ru(η(5)-C5H5)(C(CH=CPh2)=NnPr)(CO)(PiPr3)]
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: MeOH; stirring (1 h); evapn. (vac.), pptn. on toluene addn., filtering, evapn., washing (pentane); elem. anal.; | A n/a B 90% |
sodium methylate
A
sodium tetrafluoroborate
B
[Ru(η(5)-C5H5)(C(CH=CPh2)=NHPh)(CO)(PiPr3)]
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: MeOH; stirring (1 h); evapn. (vac.), pptn. on toluene addn., filtering, evapn., washing (pentane); elem. anal.; | A n/a B 90% |
trimethoxonium tetrafluoroborate
A
sodium tetrafluoroborate
B
Dimethyl ether
Conditions | Yield |
---|---|
In acetonitrile under N2, Mo complex dissolved in CH3CN, Me3OBF4 added, stirred at roomtemp. for 0.5 h; evapd., C6H6 added to residue, filtered, solvent removed, dried in vac., recrystd. from hexane with small quantity of CH2Cl2 at -50°C, elem. anal.; | A n/a B n/a C 85% |
sodium methylate
A
sodium tetrafluoroborate
B
[Ru(η(5)-C5H5)(C(NEt2)=C=CPh2)(CO)(PiPr3)]
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: MeOH; stirring (1 h); evapn. (vac.), toluene addn., filtering, evapn., washing (pentane); elem. anal.; | A n/a B 85% |
sodium methylate
A
sodium tetrafluoroborate
B
[Ru(η(5)-C5H5)(C(NC5H10)=C=CPh2)(CO)(PiPr3)]
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: MeOH; stirring (1 h); evapn. (vac.), toluene addn., filtering, evapn., washing (pentane); elem. anal.; | A n/a B 80% |
Conditions | Yield |
---|---|
In acetonitrile under N2, Mo complex dissolved in MeCN, added Et3OBF4, stirred for 0.5 h at room temp.; solvent evapd. in vac., added C6H6, filtered, solvent removed, dried invac., recrystd. from hexane with small quantity of CH2Cl2 at -50°C, elem. anal.; | A n/a B n/a C 80% |
sodium tetrahydroborate
((η-C5Me5)Ir(η6-3-methylbenzo{b}thiophene))(BF4)2
A
sodium tetrafluoroborate
B
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
C
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
D
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
E
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
Conditions | Yield |
---|---|
In dichloromethane; water To a stirred soln. of Cp(CH3)5Ir(3-MeBT)(BF4)2 in H2O and CH2Cl2 was added NaBH4 (under N2).; After 3 min the layers were sepd., and the water layer was extd. with CH2Cl2. The combined CH2Cl2 extracts were dried over Na2SO4 and filtered. Product was pptd. by addn. of Et2O. elem. anal.; ratio of isomers: 58:27:8:7; | A n/a B n/a C n/a D n/a E 79% |
trimethoxonium tetrafluoroborate
A
sodium tetrafluoroborate
B
Dimethyl ether
Conditions | Yield |
---|---|
In acetonitrile under N2, W complex dissolved in CH3CN, Me3OBF4 added, stirred at room temp. for 0.5 h; evapd., C6H6 added to residue, filtered, solvent removed, dried in vac., recrystd. from hexane with small quantity of CH2Cl2 at -50°C, elem. anal.; | A n/a B n/a C 79% |
C6H4FN2(1+)*C6BF8(1-)
A
sodium tetrafluoroborate
B
para-difluorobenzene
C
C6BF8(1-)*Na(1+)
Conditions | Yield |
---|---|
at 160 - 170℃; Glovebox; | A 11% B 79% C 71% |
sodium tetrahydroborate
{C5(CH3)5IrC8H6S}(2+)*2(BF4)(1-)={C5(CH3)5IrC8H6S}(BF4)2
A
sodium tetrafluoroborate
B
{C5(CH3)5IrC8H7S}(1+)*(BF4)(1-)={C5(CH3)5IrC8H7S}BF4
C
{C5(CH3)5IrC8H7S}(1+)*(BF4)(1-)={C5(CH3)5IrC8H7S}BF4
D
{C5(CH3)5IrC8H7S}(1+)*(BF4)(1-)={C5(CH3)5IrC8H7S}BF4
E
{C5(CH3)5IrC8H7S}(1+)*(BF4)(1-)={C5(CH3)5IrC8H7S}BF4
Conditions | Yield |
---|---|
In dichloromethane; water H2O and CH2Cl2 were purged with N2 for 5 min. To this stirred soln. was added (C5(CH3)5Ir(BT))(BF4)2 and then NaBH4. After 5 min the layers were separated, and the water layer was extracted with CH2Cl2.; After 5 min the layers were separated, and the water layer was extd. with CH2Cl2. The combined CH2Cl2 extracts were dried over Na2SO4 and filtered. Product was pptd. by addn. of ether. elem. anal.; ratio of isomers: 61:25:8:6; | A n/a B n/a C n/a D n/a E 78% |
sodium tetrahydroborate
{C5(CH3)5Ir(CH3)C8H5S}(2+)*2(BF4)(1-)={C5(CH3)5Ir(CH3)C8H5S}(BF4)2
A
sodium tetrafluoroborate
B
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
C
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
D
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
E
{C5(CH3)5Ir(CH3)C8H6S}(1+)*(BF4)(1-)={C5(CH3)5Ir(CH3)C8H6S}BF4
Conditions | Yield |
---|---|
In dichloromethane; water H2O and CH2Cl2 were purged with N2 for 5 min. To this stirred soln. was added (C5(CH3)5Ir(2-MeBT))(BF4)2 and then NaBH4.; After 5 min the layers were sepd., and the water layer was extd. with CH2Cl2. The combined CH2Cl2 extracts were dried over Na2SO4 and filtered. Product was pptd. by addn. of Et2O. elem. anal.; ratio of isomers: 60:23:9:8; | A n/a B n/a C n/a D n/a E 78% |
Conditions | Yield |
---|---|
at 160 - 170℃; Glovebox; | A 17% B 77% C 3% D 65% E 12% |
C6H4FN2(1+)*C3BF6(1-)
A
sodium tetrafluoroborate
B
para-difluorobenzene
C
C3BF6(1-)*Na(1+)
Conditions | Yield |
---|---|
at 160 - 170℃; Glovebox; | A 76% B 51% C 9% D 76% |
Conditions | Yield |
---|---|
In dichloromethane N2-atmosphere; 1 h; filtration (Al2O3), evapn. (vac.); | A n/a B 75% C n/a |
Conditions | Yield |
---|---|
In dichloromethane N2-atmosphere; 1 h; filtration (Al2O3), evapn. (vac.); | A n/a B 74% C n/a |
A
sodium tetrafluoroborate
{(OC)3Fe(μ-η4:η1-cyclohexadienyl)}2Os(CO)4
Conditions | Yield |
---|---|
In tetrahydrofuran (Ar), added at -70°C, after 1 h warmed to -30°C; solvent removed at -30°C, dissolved in CH2Cl2 at room temp., centrifugation, reduced to dryness, dried for 2 h in vacuo, elem. anal.; | A n/a B 71% |
sodium tetrafluoroborate
Ethyl 4-amino-N-(3,4-dichlorobenzyl)indole-2-carboxylate
N-(3,4-dichlorobenzyl)-2-ethoxycarbonylindole-4-diazonium tetrafluoroborate
Conditions | Yield |
---|---|
With hydrogenchloride; sodium nitrite In phosphorus pentaoxide; water | 100% |
sodium tetrafluoroborate
bis[(2-pyridyl)methyl]amine
Conditions | Yield |
---|---|
With ascorbic acid In water addn. of aq. ligand soln. to aq. FeCl2 soln. (contg. ascorbic acid to reduce Fe(III)) under N2, ratio Fe : Dipica = 1:2.1, addn. of excess NaBF4; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In dichloromethane; water A CH2Cl2 layer of Ni(HNC2H4NHC3H6NHC2H4N(C16H33)C3H6)(ClO4)2 is equilibrated with an aq. layer of NaBF4.; The ClO4(1-) ions are quantitatively replaced by the BF4(1-) ions forming the complex Ni(HNC2H4NHC3H6NHC2H4N(C16H33)C3H6)(BF4)2.; | 100% |
sodium tetrafluoroborate
[Ni(S((CH2)2SCH2C(CH3)NO)2H)(H2O)](1+)*ClO4(1-)=[Ni(S((CH2)2SCH2C(CH3)NO)2H)]ClO4*H2O
Conditions | Yield |
---|---|
In methanol | A 0% B 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
With potassium chloride In dichloromethane; water; acetonitrile byproducts: KBF4; aq. soln. of KCl added to aq. soln. of complex, KBF4 filtered, soln. concd. in vac. to dryness, residue dissolved in MeCN and refluxed for 72 h,cooled to room temp., concd. to dryness then dissolved in CH2Cl2, shake d with aq. soln. of NaBF4; org. phase dried with Na2SO4, concd. in vac., dried at 0.05 Torr; pure by (1)H NMR; | 100% |
Conditions | Yield |
---|---|
In not given Atherton, M. J.; Fawcett, J.; Holloway, J. H.; Hope, E. G.; Karacar, A.;Russell, D. R.; Saunders, G. C. J. Chem. Soc., Dalton Trans. 1996, 321 5; elem. anal.; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In dichloromethane room tepm., pptn., addn. of excess of NaBF4; crystn. (C6H6/CH2Cl2); | 100% |
sodium tetrafluoroborate
(E)-1-((dibutyl(3-hydroxy-3-methylbut-1-en-1-yl)stannyl)hexyl)-3-ethyl-1H-imidazol-3-ium bromide
(E)-1-(6-(dibutyl(3-hydroxy-3-methylbut-1-en-1-yl)stannyl)hexyl)-3-ethyl-1H-imidazol-3-ium tetrafluoroborate
Conditions | Yield |
---|---|
In acetone at 20℃; for 24h; | 100% |
sodium tetrafluoroborate
2-(diacetoxyiodo)mesitylene
2-Methoxyphenylboronic acid
Conditions | Yield |
---|---|
Stage #1: 2-(diacetoxyiodo)mesitylene; 2-Methoxyphenylboronic acid With boron trifluoride diethyl etherate In dichloromethane at 0 - 20℃; Stage #2: sodium tetrafluoroborate In dichloromethane; water for 0.5h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In water at 20℃; for 5h; | 100% |
Conditions | Yield |
---|---|
In water at 60℃; | 100% |
sodium tetrafluoroborate
1,3-dimethyl-4-(3′,4′,5′-trimethoxyphenyl)-5-(4″-methoxyphenyl)imidazolium iodide
Conditions | Yield |
---|---|
In acetone at 20℃; for 24h; | 100% |
sodium tetrafluoroborate
4-(3-chloro-4,5-dimethoxyphenyl)-5-(4-methoxyphenyl)-1,3-diethylimidazolium iodide
Conditions | Yield |
---|---|
In acetone at 20℃; for 24h; | 100% |
sodium tetrafluoroborate
4-(3-bromo-4,5-dimethoxyphenyl)-5-(4-methoxyphenyl)-1,3-diethylimidazolium iodide
Conditions | Yield |
---|---|
In acetone at 20℃; for 24h; | 100% |
sodium tetrafluoroborate
methyl iodide
Conditions | Yield |
---|---|
Stage #1: BF4(1-)*C71H92N4O5*C24H32O8*H(1+); methyl iodide at 20℃; for 72h; Inert atmosphere; Schlenk technique; Stage #2: sodium tetrafluoroborate In dichloromethane; water; acetone at 20℃; for 18h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
Stage #1: BF4(1-)*C72H95N4O5(1+)*C24H32O8 With hydrogenchloride In diethyl ether; dichloromethane at 20℃; for 1h; Stage #2: sodium tetrafluoroborate In dichloromethane; water; acetone at 20℃; for 18h; | 100% |
Conditions | Yield |
---|---|
In dichloromethane-d2 at 25℃; under 1500.15 Torr; for 120h; Inert atmosphere; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In water at 20℃; for 6h; Inert atmosphere; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In dichloromethane; water | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In acetone at 20℃; for 24h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In water at 20℃; for 12h; | 100% |
Conditions | Yield |
---|---|
In ethanol for 2h; Sonication; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In methanol; water for 0.5h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In methanol; water for 0.5h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In water; acetone at 20℃; for 5h; | 100% |
sodium tetrafluoroborate
Conditions | Yield |
---|---|
In methanol at 20℃; for 24h; | 100% |
Conditions | Yield |
---|---|
In water; acetone at 20℃; | 100% |
In water; acetone at 20℃; for 0.75h; | 94% |
In water; acetone at 20℃; for 1h; | 89% |
In methanol; water at 20℃; for 1h; Inert atmosphere; |
Product Name: Sodium tetrafluoroborate (CAS NO.13755-29-8)
Molecular Formula: NaBF4
Molecular Weight: 109.79g/mol
Mol File: 13755-29-8.mol
Appearance: white crystals or powder
Melting Point: 384 °C
Water Solubility: 108 g/100 mL (26 ºC)
Sensitive: Hygroscopic
Stability: Moisture sensitive; do not store in glass (though the completely dry material does not etch glass). Incompatible with strong oxidizing agents.
H-Bond Donor: 0
H-Bond Acceptor: 5
Structure Descriptors of Sodium tetrafluoroborate (CAS NO.13755-29-8):
IUPAC Name: sodium tetrafluoroborate
Canonical SMILES: [B-](F)(F)(F)F.[Na+]
InChI: InChI=1S/BF4.Na/c2-1(3,4)5;/q-1;+1
InChIKey: KGJZTOFHXCFQIV-UHFFFAOYSA-N
Product Categories: Inorganic Chemicals;Inorganics
Sodium tetrafluoroborate (CAS NO.13755-29-8) is used as a fluorinating agent.
1. | scu-rat LD50:550 mg/kg | ZKKOBW Zeitschrift fuer Krebsforschung und Klinische Onkologie. 80 (1973),17. |
Reported in EPA TSCA Inventory.
Safety Information of Sodium tetrafluoroborate (CAS NO.13755-29-8):
Hazard Codes:C ,Xi
Risk Statements:34
34:Causes burns
Safety Statements:45-36/37/39-25
45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible)
36/37/39:Wear suitable protective clothing, gloves and eye/face protection
25:Avoid contact with eyes
RIDADR:3260
WGK Germany:1
RTECS:ED2975000
F:21
Hazard Note:Irritant
Moderately toxic by subcutaneous route. When heated to decomposition it emits toxic fumes of F− and Na2O.
OSHA PEL: TWA 2.5 mg(F)/m3
ACGIH TLV: TWA 2.5 mg(F)/m3; BEI: 3 mg/g creatinine of fluorides in urine prior to shift; 10 mg/g creatinine of fluorides in urine at end of shift.
NIOSH REL: (Inorganic Fluorides) TWA 2.5 mg(F)/m3
Sodium tetrafluoroborate , its CAS NO. is 13755-29-8, the synonyms are Borate(1-), tetrafluoro-, sodium ; Sodium boron tetrafluoride ; Sodium fluoborate .
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View