Conditions | Yield |
---|---|
In neat (no solvent) N2O5 (from P2O5 with HNO3); heating first to 50°C, at the end of reaction to 90°C;; drying on heating, removal of excessive iodine by sublimation; recrystallization in water several times, drying on heating to 220°C;; | 40% |
In neat (no solvent) N2O5 (from P2O5 with HNO3); heating first to 50°C, at the end of reaction to 90°C;; drying on heating, removal of excessive iodine by sublimation; recrystallization in water several times, drying on heating to 220°C;; | 40% |
In tetrachloromethane byproducts: O2; reaction of N2O5 with soln. of I2 in CCl4 at 0°C; at higher temp. formation of some O2;; | |
In tetrachloromethane byproducts: O2; reaction of N2O5 with soln. of I2 in CCl4 at 0°C; at higher temp. formation of some O2;; |
Conditions | Yield |
---|---|
In water passing stream of O3 quickly through neutral soln.;; | |
In water passing stream of O3 quickly through neutral soln.;; | 0% |
In neat (no solvent) | |
In neat (no solvent) | |
In water |
Conditions | Yield |
---|---|
In not given byproducts: HClO4; I2 reacts with chlorine heptoxide at normal temp. under explosion, at low temp. slowlier; reactn. product: white powder: heating (100°C) -> setting free HClO4, residue: I2O5;; |
Conditions | Yield |
---|---|
In neat (no solvent) reaction by influence of O3 on solid, dry I2;; |
oxygen
ozone
potassium iodide
A
iodine pentoxide
B
periodate
C
iodate
Conditions | Yield |
---|---|
With Na2CO3 or K2CO3 In not given reaction by use of a O3-O2 mixture in a Na2CO3- or K2CO3-containing alcaline 0.1n-KI soln. for a period of 20-30 min.;; |
Conditions | Yield |
---|---|
In not given reaction by absorption of O3-containing O2 in a 3-8% KI soln.;; |
chlorine dioxide
iodine
A
iodine pentoxide
B
iodine trichloride
Conditions | Yield |
---|---|
In neat (no solvent) from ClO2 (from KClO3 and H2SO4) and dry iodine;; ICl3 evaporated on water bath by grinding; I2O5 very pure;; | |
In neat (no solvent) from ClO2 (from KClO3 and H2SO4) and dry iodine;; ICl3 evaporated on water bath by grinding; I2O5 very pure;; |
chlorine dioxide
iodine
chlorine
iodine pentoxide
Conditions | Yield |
---|---|
In neat (no solvent) on heating I2 with euchlorine;; | |
In neat (no solvent) on heating I2 with euchlorine;; | |
In neat (no solvent) |
Conditions | Yield |
---|---|
In neat (no solvent) from solid N2O5 and dry I2;; product mixture;; |
Conditions | Yield |
---|---|
In neat (no solvent) at red heat with platinum asbestos or -sponge;; | 0% |
Electric Arc; mixture of I2O5 and other iodine oxides;; | |
In neat (no solvent) 90-100atm O2-pressure; heating to 250°C;; |
Conditions | Yield |
---|---|
In neat (no solvent) main product I2O5;; | |
In neat (no solvent) main product I2O5;; |
hypochlorous anhydride
iodine trichloride
A
iodine pentoxide
B
chlorine
Conditions | Yield |
---|---|
In neat (no solvent) passing Cl2O over ICl3, surface reaction;; | |
In neat (no solvent) passing Cl2O over ICl3, surface reaction;; |
Conditions | Yield |
---|---|
In acetic acid heating with glacial acetic acid;; |
iodine heptafluoride
acetone
A
iodine pentoxide
B
iodine
Conditions | Yield |
---|---|
In acetone heating;; pptn.;; |
HIO3*I2O5=HI3O8
iodine pentoxide
Conditions | Yield |
---|---|
In solid heated to 210°C in a dynamic vacuum for 12 h; |
Conditions | Yield |
---|---|
In neat (no solvent) heating (1173 K); differential thermal analysis, thermogravimetry, differential scanning calorimetry; |
Conditions | Yield |
---|---|
In neat (no solvent) heating to 200-250°C;; | |
In neat (no solvent) heating to 200-250°C;; |
iodine pentoxide
Conditions | Yield |
---|---|
In neat (no solvent) byproducts: nitrous gases, N2O5; on heating to 130°C;; pure I2O5;; |
dinitrogen pentoxide
iodine pentoxide
Conditions | Yield |
---|---|
With iodine |
iodic acid
iodine pentoxide
Conditions | Yield |
---|---|
In neat (no solvent) heating to 250°C in vacuum for 100h; adsorption of H2O discussed;; pure I2O5;; | |
In neat (no solvent) above 110°C;; | |
In neat (no solvent) byproducts: H2O; dehydration;; |
periodic acid
A
iodine pentoxide
B
water
C
oxygen
D
ozone
Conditions | Yield |
---|---|
In neat (no solvent) decompn. by heating at 135-145 °C;; | |
In neat (no solvent) decompn. by heating at 135-145 °C;; |
periodic acid
iodine pentoxide
Conditions | Yield |
---|---|
With acetyl chloride In acetic anhydride pptn.;; | |
In neat (no solvent) gradually decompn. at 138°C;; | |
In neat (no solvent) gradually decompn. at 138°C;; | |
With acetyl chloride In acetic anhydride pptn.;; |
Conditions | Yield |
---|---|
In ethyl acetate heating with ethyl acetate;; |
carbon tetraiodide
iodine pentoxide
Conditions | Yield |
---|---|
With oxygen In neat (no solvent) Irradiation (UV/VIS); oxidation in the light of a mercury-lamp, formation of I2O5;; |
periodic acid
A
iodine pentoxide
B
water
C
oxygen
D
ozone
Conditions | Yield |
---|---|
In neat (no solvent) decompn. by heating at 135-145 °C;; | |
In neat (no solvent) decompn. by heating at 135-145 °C;; |
periodic acid
iodine pentoxide
Conditions | Yield |
---|---|
In neat (no solvent) byproducts: H2O, O2; heating at ambient pressure; begin at 138°C;; | |
In neat (no solvent) byproducts: H2O, O2; heating at ambient pressure; begin at 138°C;; |
Conditions | Yield |
---|---|
In neat (no solvent) Kinetics; decompn. at 623 K; |
Conditions | Yield |
---|---|
In neat (no solvent) heating;; | |
In neat (no solvent) heating;; |
Conditions | Yield |
---|---|
In neat (no solvent) byproducts: O2; heating to 125-130°C;; |
Conditions | Yield |
---|---|
In neat (no solvent) on storage in desiccator;; |
Conditions | Yield |
---|---|
In neat (no solvent, solid phase) I2O5 was loaded into a Kel-F reactor; then IF5 was added; the mixt. was heated to 105°C and held at this temp. for 50 min; removing all volatiles in vac. at 25°C; | 99% |
Conditions | Yield |
---|---|
With AgNO3 In water High Pressure; NpO2 (0.041 mmol), AgNO3 (0.039 mmol), and I2O5 (0.039 mmol) were loadedin an autoclave; H2O was added; the autoclave was sealed and placed in a preheated furnace for 3 d at 180°C; the box furnace was cooled at 9°/h to 23°C; EDX anal.; | 99% |
Conditions | Yield |
---|---|
In water High Pressure; mixt. of K2CO3 (0.75 mmol), V2O5 (0.5 mmol), I2O5 (2 mmol) and H2O heated at 155°C in autoclave for 4 d, cooled to room temp. at 3°/h; washed with water and EtOH, dried in air; powder X-ray diffraction; | 95% |
iodine pentoxide
water
bismuth(III) oxide
potassium carbonate
Conditions | Yield |
---|---|
In water mixt. of K2CO3, V2O5, I2O5, Bi2O3 and H2O heated at 230°C in autoclave for 4 d, cooled to room temp. at 3°/h; washed with water and EtOH, dried in air; powder X-ray diffraction; | A n/a B 92% |
Conditions | Yield |
---|---|
In water at 210℃; for 72h; Autoclave; | 92% |
iodine pentoxide
Conditions | Yield |
---|---|
Stage #1: bismuth(III) chloride; iodine pentoxide; potassium fluoride dihydrate In water for 2h; Stage #2: In water at 210℃; for 96h; Autoclave; | 90.2% |
iodine pentoxide
sodium hydrogencarbonate
Conditions | Yield |
---|---|
With (C5H4N)2; HCl In water High Pressure; sealed, heated to 120°C for 7 d; cooled at an averaged rate of 9°C/h to room temp., washed (H2O, MeOH), dried; | 90% |
Conditions | Yield |
---|---|
With Li2CO3 In water High Pressure; heating mixt. of palladium compd., I2O5, Li2CO3 and water at 200°C for 4 d; slow cooling to room temp. at rate of 6°C/h, isolation of crystals, XRD; | 90% |
In water High Pressure; heating mixt. of palladium compd., I2O5 and water at 200°C for 4 d; | 0% |
Conditions | Yield |
---|---|
In water at 230℃; for 72h; Temperature; Solvent; Time; Autoclave; | 90% |
iodine pentoxide
barium(II) chloride dihydrate
Conditions | Yield |
---|---|
In water at 210℃; for 96h; | 90% |
iodine pentoxide
Conditions | Yield |
---|---|
In water High Pressure; mixt. of Ce nitrate, PbCl2, I2O5, and H2O heated at 200°C in stainless steel vessel for 5 d; slow cooling to 30°C at 6°C/h, crystals isolated, washed with water, dried in air; XRD, EDS; | 89% |
Conditions | Yield |
---|---|
In water High Pressure; heating mixt. of palladium compd., I2O5, silver oxide and water at 200°C for 4 d; slow cooling to room temp. at rate of 6°C/h, isolation of crystals, washing with hot water, drying in air, XRD; | 85% |
Conditions | Yield |
---|---|
In water at 160℃; for 72h; Autoclave; | 85% |
Conditions | Yield |
---|---|
In water at 210℃; for 96h; | 85% |
Conditions | Yield |
---|---|
In water High Pressure; sealed in a Teflon-lined autoclave, heated in an oven at 443 K for one wk under autogenously generated pressure, cooled slowly to room temp.; the crystals washed with deionized water and anhyd. acetone; | 84% |
In water at 180℃; for 24h; Autoclave; |
iodine pentoxide
Conditions | Yield |
---|---|
In water High Pressure; a mixt. of La salt, V2O5, I2O5 and H2O sealed in an autoclave, heated at250°C for 4 d; cooled to room temp. at a rate of 6°C/h, washed (hot H2O, EtOH), dried in air; EDS elem. anal.; | 84% |
iodine pentoxide
Conditions | Yield |
---|---|
In water High Pressure; the mixt. of Ba(IO3)2*H2O, Nb2O5, I2O5 in water was sealed in an autoclave equipped with a Teflon liner at 230°C for 4 days; powder X-ray diffraction; | 83% |
Conditions | Yield |
---|---|
In water at 210℃; for 72h; Autoclave; | 83% |
Conditions | Yield |
---|---|
at 230℃; for 72h; pH=0.5 - 2; Autoclave; | 83% |
Conditions | Yield |
---|---|
With nitric acid In water at 230℃; for 72h; Autoclave; | 83% |
iodine pentoxide
Conditions | Yield |
---|---|
In water High Pressure; at 200°C for 72 h; autoclave cooled at 9°C/h to 23°C; mother liquors decanted; washed (MeOH); dried; | 82% |
iodine pentoxide
Conditions | Yield |
---|---|
In water High Pressure; a mixt. of La2O3, V2O5, I2O5 and H2O sealed in an autoclave, heated at 250°C for 10 d; cooled to room temp. at a rate of 6°C/h, washed (H2O, EtOH), dried in air, sepd. manually; EDS elem. anal.; | A 5% B 82% |
Conditions | Yield |
---|---|
In water mixt. of K2CO3 (0.4 mmol), V2O5 (0.5 mmol), I2O5 (2 mmol) and H2O heatedat 160°C in autoclave for 4 d, cooled to room temp. at 3° /h; washed with water and EtOH, dried in air; powder X-ray diffraction; | 82% |
Conditions | Yield |
---|---|
In water at 190℃; for 72h; Autoclave; High pressure; | 81% |
Conditions | Yield |
---|---|
In water High Pressure; equimol., In salt and bipy added to a soln. of I2O5 with stirring, stirred for 30 min, heated at 100°C for 7 d; elem. anal., TGA; | 80% |
Conditions | Yield |
---|---|
In water High Pressure; addn. of vanadium compd. and bipyridine deriv. to stirred aq. soln. of iodine(V) oxide, stirring for 30 min, heating at 120°C for 6 d; isolation of crystals, elem. anal.; | 80% |
The Iodine pentoxide, with the CAS registry number 12029-98-0, is also known as Diiodine pentaoxide. It belongs to the product categories of Inorganics; Halogen oxide. Its EINECS number is 234-740-2. This chemical's molecular formula is I2O5 and molecular weight is 333.81. What's more, its systematic name is Oxybis(iodane) tetraoxide. This iodine oxide is the anhydride of iodic acid, and the only stable anhydride of iodine. This chemical is stable at common pressure and temperature, and it should be sealed and stored in a cool and dry place. Moreover, it should be protected from reductants, organic materials, metal powder and light.
Physical properties of Iodine pentoxide are: (1)ACD/LogP: -5.67; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): -5.67; (4)ACD/LogD (pH 7.4): -5.67; (5)ACD/BCF (pH 5.5): 1.00; (6)ACD/BCF (pH 7.4): 1.00 ; (7)#H bond acceptors: 5; (8)#H bond donors: 0; (9)#Freely Rotating Bonds: 2; (10)Polar Surface Area: 77.51 Å2.
Preparation: this chemical is produced by dehydrating iodic acid at 200 °C in a stream of dry air.
2HIO3 → I2O5 + H2O
When you are using this chemical, please be cautious about it as the following:
This chemical can cause burns. When contact with combustible material, it may cause fire. You should keep them away from combustible material. In case of contact with eyes, you should rinse immediately with plenty of water and seek medical advice. When using it, you need wear suitable protective clothing, gloves and eye/face protection. You must take off immediately all contaminated clothing. In case of accident or if you feel unwell, you should seek medical advice immediately (show the label where possible).
You can still convert the following datas into molecular structure:
(1)SMILES: O=I(=O)OI(=O)=O
(2)Std. InChI: InChI=1S/I2O5/c3-1(4)7-2(5)6
(3)Std. InChIKey: BIZCJSDBWZTASZ-UHFFFAOYSA-N
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View