Conditions | Yield |
---|---|
With potassium hydroxide; hydrazine hydrate In diethylene glycol for 6h; Wolff-Kishner reduction; Heating; | 89% |
Multi-step reaction with 2 steps 1: methanol / 60 °C / Inert atmosphere 2: potassium carbonate; methanol; hydrogen; palladium 10% on activated carbon / 24 h / 65 °C / 760.05 Torr View Scheme |
Conditions | Yield |
---|---|
With aluminium; mercury durch Chlorierung; | |
bei der Chlorierung; | |
With aluminium; mercury durch Chlorieren; |
Conditions | Yield |
---|---|
bei der Chlorierung; | |
With aluminium; mercury durch Chlorieren; | |
With iodine; chlorine |
Conditions | Yield |
---|---|
With phosphorus pentachloride |
Conditions | Yield |
---|---|
Diazotization.Behandlung der Diazoniumsalz-Loesung mit CuCl; |
Conditions | Yield |
---|---|
With iodine durch Chlorieren; | |
With molybdenum(V) chloride durch Chlorieren; |
Conditions | Yield |
---|---|
Diazotization.Behandlung der Diazoniumchloridloesung mit Cuprochlorid; |
Conditions | Yield |
---|---|
Austausch der Aminogruppe gegen Chlor, Reduktion der Nitrogruppe und Ersatz der neu entstandenen Aminogruppe durch Chlor; |
phosphorus pentachloride
A
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
at 250 - 280℃; im Rohr; |
sulfuryl dichloride
toluene
A
para-chlorotoluene
B
3,4-Dichlorotoluene
C
benzyl chloride
Conditions | Yield |
---|---|
at 160℃; Product distribution; |
Conditions | Yield |
---|---|
at 20℃; sowie bei 40grad; Chlorierung; |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
With steam; sulfuric acid at 190 - 230℃; |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
With steam; sulfuric acid at 190 - 230℃; |
Conditions | Yield |
---|---|
With sulfuryl dichloride at 160℃; |
1,2-dichloro-4-methyl-3,5-dinitro-benzene
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
In methanol |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
With methanol; palladium 10% on activated carbon; hydrogen; potassium carbonate at 65℃; under 760.051 Torr; for 24h; Catalytic behavior; |
para-chlorotoluene
2-methylchlorobenzene
A
3,4-Dichlorotoluene
B
2,4-dichlorotoluene
Conditions | Yield |
---|---|
With aluminum (III) chloride; chlorine; iron at 40℃; for 16h; Molecular sieve; Overall yield = 90.5 %; |
Conditions | Yield |
---|---|
With copper acetylacetonate; potassium hydroxide; N,N`-dimethylethylenediamine In dichloromethane; N,N-dimethyl-formamide at 60℃; for 5h; Reagent/catalyst; | 98.4% |
Conditions | Yield |
---|---|
With nitric acid at 0 - 20℃; for 2h; | 98% |
With sulfuric acid; cis-nitrous acid | 95% |
With nitric acid In 1,2-dichloro-ethane at 40 - 45℃; for 2h; Temperature; | 95% |
3,4-Dichlorotoluene
2-(4-chlorobenzylidene)-1-cyclohexanone
4-chloro-2'-hydroxydiphenylmethane
Conditions | Yield |
---|---|
With hydrogenchloride; sodium hydroxide; hydrogen sulfide; nitrogen In ethyl acetate; toluene | 97.8% |
Conditions | Yield |
---|---|
With sulfuric acid; ozone; acetic acid; manganese(II) acetate at 16℃; for 2.91667h; | 96% |
With sodium bromate; sulfuric acid; sodium bromide In water at 100℃; for 8h; Irradiation; | 83% |
Stage #1: 3,4-Dichlorotoluene With tert.-butylhydroperoxide; sodium hydroxide; tungsten(VI) oxide In water at 80℃; for 10h; Stage #2: With hydrogenchloride In water | 80% |
Conditions | Yield |
---|---|
In hexane N2-atmosphere; filtering, crystn.; elem. anal.; | 95% |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
With chlorosulfonic acid; thionyl chloride at 0 - 20℃; for 20h; | 95% |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
In 2-methylundecane | 94.4% |
With sulfuric acid; nitric acid In dichloromethane | |
With nitric acid In 2-methylundecane; water | |
With nitric acid In 2-methylundecane |
3,4-Dichlorotoluene
3,4-dichloro-1-trichloromethylbenzene
Conditions | Yield |
---|---|
With chlorine; dibenzoyl peroxide at 90℃; Temperature; Green chemistry; | 93.9% |
With chlorine at 115 - 117℃; for 24h; | |
With chlorine at 115 - 117℃; for 24h; Temperature; | |
With chlorine at 115 - 117℃; for 24h; Temperature; |
3,4-Dichlorotoluene
4-methylphenylboronic acid
4'-methyl-4,4''-dimethyl-(1,1',2',1'')-terphenyl
Conditions | Yield |
---|---|
With C28H44N2PPd; potassium carbonate In ethanol; water at 60℃; for 6h; Suzuki coupling; | 93% |
chloro-trimethyl-silane
3,4-Dichlorotoluene
1,2-bis(trimethylsilyl)-4-methylbenzene
Conditions | Yield |
---|---|
With 1,3-dimethyl-2-imidazolidinone; magnesium; copper(l) chloride; lithium chloride at 55℃; for 17h; | 92% |
With N,N,N,N,N,N-hexamethylphosphoric triamide; iodine; magnesium at 130℃; for 96h; Substitution; | 62% |
Conditions | Yield |
---|---|
With aluminium trichloride In carbon disulfide for 24h; Heating; | 90% |
With aluminium trichloride |
Conditions | Yield |
---|---|
With aluminium trichloride In carbon disulfide for 192h; Heating; | 88% |
Conditions | Yield |
---|---|
With sodium bromate; 2,2'-azobis(isobutyronitrile); sulfuric acid; sodium bromide In water; 1,2-dichloro-ethane Reflux; | 82% |
With bromine |
3,4-Dichlorotoluene
3,4-dichlorobenzyl bromide
Conditions | Yield |
---|---|
With sodium bromate; 2,2'-azobis(isobutyronitrile); sulfuric acid; sodium bromide; dibenzoyl peroxide In water; 1,2-dichloro-ethane Reflux; | 81% |
With bromine | 66% |
With hydrogen bromide; dihydrogen peroxide In water at 0℃; Incandescent lamp light; | 61.1% |
3,4-Dichlorotoluene
1,2-Cl2-4-CF3-5-MeC6H2
Conditions | Yield |
---|---|
With hydrogen fluoride In tetrachloromethane | 74% |
Conditions | Yield |
---|---|
With tert.-butylhydroperoxide; potassium phosphate; copper diacetate In 1,2-dichloro-ethane at 20℃; for 12h; | 74% |
Conditions | Yield |
---|---|
With bismuth(III) vanadate; ammonia at 440℃; under 760.051 Torr; Catalytic behavior; Temperature; | 73.1% |
With ammonia at 380℃; Reagent/catalyst; Flow reactor; | 72.5% |
With vanadyl pyrophosphate; ammonia; water; oxygen at 414.84℃; | 55% |
With ammonia; oxygen; DC-108 at 425℃; Yield given; |
3,4-Dichlorotoluene
Acetanilid
N-(2-(3,4-dichlorobenzoyl)phenyl)acetamide
Conditions | Yield |
---|---|
With tert.-butylhydroperoxide; palladium diacetate In dimethyl sulfoxide at 100℃; for 20h; regioselective reaction; | 67% |
3,4-Dichlorotoluene
Conditions | Yield |
---|---|
With di-tert-butyl peroxide; palladium diacetate; iron(II) chloride at 110℃; for 10h; Inert atmosphere; regioselective reaction; | 67% |
3,4-Dichlorotoluene
2-amino-benzenethiol
2-(3,4-dichlorophenyl)-1,3-benzothiazole
Conditions | Yield |
---|---|
With methanesulfonic acid; di-tert-butyl peroxide; copper(II) oxide at 120℃; for 20h; | 60% |
3,4-Dichlorotoluene
A
3,4-dichlorobenzyl bromide
Conditions | Yield |
---|---|
With cerium(III) ammonium nitrate; potassium bromide In acetic acid at 80 - 90℃; for 1.5h; | A 57% B 35% |
3,4-Dichlorotoluene
2-methoxy-phenylamine
A
(2-chloro-4-methylphenyl)(2-methoxyphenyl)amine
B
(2-chloro-5-methylphenyl)(2-methoxyphenyl)amine
Conditions | Yield |
---|---|
With bis(η3-allyl-μ-chloropalladium(II)); 1,2-bis(diphenylphosphino)-1′-(diisopropylphosphino)-4-tert-butylferrocene; sodium t-butanolate In toluene at 115℃; for 20h; Schlenk technique; Inert atmosphere; Overall yield = 85 %; regioselective reaction; | A 57% B 28% |
3,4-Dichlorotoluene
m-Anisidine
A
(2-chloro-4-methylphenyl)(3-methoxyphenyl)amine
B
(2-chloro-5-methylphenyl)(3-methoxyphenyl)amine
Conditions | Yield |
---|---|
With bis(η3-allyl-μ-chloropalladium(II)); 1,2-bis(diphenylphosphino)-1′-(diisopropylphosphino)-4-tert-butylferrocene; sodium t-butanolate In toluene at 115℃; for 20h; Schlenk technique; Inert atmosphere; Overall yield = 79 %; regioselective reaction; | A 24% B 55% |
3,4-Dichlorotoluene
4-nitro-benzoyl chloride
3,4-dichloro-2-(4-nitrobenzoyl)toluene
Conditions | Yield |
---|---|
With aluminium trichloride In 1,2-dichloro-ethane for 5h; Heating; | 53% |
Conditions | Yield |
---|---|
With copper(II) bis(trifluoromethanesulfonate); 1-methyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(hexafluorophosphate) In dichloromethane; acetonitrile at 20℃; for 24h; Sealed tube; Inert atmosphere; | 52% |
3,4-Dichlorotoluene
aniline
A
2-chloro-4-methyl-N-phenylaniline
B
(2-chloro-5-methyl)diphenylamine
Conditions | Yield |
---|---|
With bis(η3-allyl-μ-chloropalladium(II)); 1,2-bis(diphenylphosphino)-1′-(diisopropylphosphino)-4-tert-butylferrocene; sodium t-butanolate In toluene at 115℃; for 20h; Schlenk technique; Inert atmosphere; Overall yield = 68 %; regioselective reaction; | A 51% B 17% |
3,4-Dichlorotoluene
A
p-toluidine
B
toluene
C
1-amino-3-methylbenzene
Conditions | Yield |
---|---|
With ammonia; sodium at 25℃; for 0.00833333h; Product distribution; Further Variations:; Reagents; Dehalogenation; substitution; | A 32% B 47% C 18% |
3,4-Dichlorotoluene
4-methoxy-aniline
A
(2-chloro-5-methylphenyl)(4-methoxyphenyl)amine
B
(2-chloro-4-methylphenyl)(4-methoxyphenyl)amine
Conditions | Yield |
---|---|
With bis(η3-allyl-μ-chloropalladium(II)); 1,2-bis(diphenylphosphino)-1′-(diisopropylphosphino)-4-tert-butylferrocene; sodium t-butanolate In toluene at 115℃; for 20h; Schlenk technique; Inert atmosphere; Overall yield = 71 %; regioselective reaction; | A 46% B 25% |
The 3,4-Dichlorotoluene, with the CAS registry number 95-75-0, is also known as Benzene, 1,2-dichloro-4-methyl-. It belongs to the product categories of Organics; Aryl; C7; Halogenated Hydrocarbons; Alpha Sort; Analytical Standards; Aromatics Chemical Class; Chemical Class; ChloroVolatiles/ Semivolatiles; Halogenated. Its EINECS number is 202-447-9. This chemical's molecular formula is C7H6Cl2 and molecular weight is 161.03. What's more, its systematic name is 1,2-Dichloro-4-methylbenzene. This chemical should be sealed and stored in a cool, ventilated and dry place. Moreover, it should be protected from oxides, heat and fire. It is used as a solvent and an organic synthesis intermediate.
Physical properties of 3,4-Dichlorotoluene are: (1)ACD/LogP: 3.743; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 3.74; (4)ACD/LogD (pH 7.4): 3.74; (5)ACD/BCF (pH 5.5): 412.04; (6)ACD/BCF (pH 7.4): 412.04; (7)ACD/KOC (pH 5.5): 2590.45; (8)ACD/KOC (pH 7.4): 2590.45; (9)#H bond acceptors: 0; (10)#H bond donors: 0; (11)#Freely Rotating Bonds: 0; (12)Index of Refraction: 1.543; (13)Molar Refractivity: 40.868 cm3; (14)Molar Volume: 129.61 cm3; (15)Polarizability: 16.201×10-24cm3; (16)Surface Tension: 35.63 dyne/cm; (17)Density: 1.242 g/cm3; (18)Flash Point: 80.172 °C; (19)Enthalpy of Vaporization: 42.702 kJ/mol; (20)Boiling Point: 208.919 °C at 760 mmHg; (21)Vapour Pressure: 0.3 mmHg at 25°C.
Uses of 3,4-Dichlorotoluene: it can be used to produce 1-(4,5-dichloro-2-methyl-phenyl)-ethanone by heating. It will need reagent AlCl3 and solvent CS2 with the reaction time of 24 hours. The yield is about 90%.
When you are using this chemical, please be cautious about it as the following:
This chemical is irritating to eyes, respiratory system and skin. It is harmful if swallowed. You should not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). When using it, you must avoid contact with skin and eyes.
You can still convert the following datas into molecular structure:
(1)SMILES: Cc1cc(Cl)c(Cl)cc1
(2)Std. InChI: InChI=1S/C7H6Cl2/c1-5-2-3-6(8)7(9)4-5/h2-4H,1H3
(3)Std. InChIKey: WYUIWKFIFOJVKW-UHFFFAOYSA-N
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View