Conditions | Yield |
---|---|
With 2,3-dimethylbutane In benzene at 20℃; Irradiation; | 94% |
With chlorine at 80 - 95℃; unter Ausschluss von Sauerstoff; |
C11H16Cl10NO3P
A
bis(2,2,2-trichloroethyl) piperidinophosphonate
B
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 180℃; under 0.03 Torr; | A 89% B 93% |
C10H14Cl10NO4P
A
bis(2,2,2-trichloroethyl) morpholinophosphonate
B
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 180℃; under 0.03 Torr; | A 87% B 93% |
N,N-Dichlorobenzenesulfonamide
1,2-Dichloroethylene
A
benzenesulfonamide
B
N-(2,2-dichloroethylidene)benzenesulfonamide
C
N-{2,2-dichloro-1-[(phenylsulfonyl)amino]ethyl}benzenesulfonamide
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 47 - 55℃; for 10h; Irradiation; Further byproducts given. Yields of byproduct given; | A n/a B n/a C 80.7% D n/a |
(2-Chlor-vinyl)-dimethyl-chlorsilan
A
1,2-Dichloroethylene
B
dimethylsilicon dichloride
C
Chloro-dimethyl-(1,2,2-trichloro-ethyl)-silane
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With chlorine for 5h; Further byproducts given; | A 5% B 6% C 70% D 2% |
N,N-Dichlorobenzenesulfonamide
1,2-Dichloroethylene
A
1,1,2,2-tetrachloroethylene
B
Trichloroethylene
C
N-(2,2,2-trichloroethylidene)benzenesulfonamide
D
N-(2,2-dichloroethylidene)benzenesulfonamide
E
N-{2,2-dichloro-1-[(phenylsulfonyl)amino]ethyl}benzenesulfonamide
F
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 55℃; for 22h; Product distribution; other time, other temperature, other initiator; | A n/a B n/a C n/a D n/a E 54.1% F n/a |
1,2-Dichloroethylene
N,N-dichloro-4-chlorobenzenesulfonamide
A
N-(2,2-dichloroethylidene)-p-chlorobenzenesulfonamide
B
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
for 4h; Irradiation; | A 50% B n/a |
N,N-Dichlorobenzenesulfonamide
1,2-Dichloroethylene
A
N-(2,2-dichloroethylidene)benzenesulfonamide
B
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
for 4h; Irradiation; | A 45% B n/a |
β-chlorovinyltrimethylsilane
A
chloro-trimethyl-silane
B
1,2-Dichloroethylene
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With chlorine for 5h; Further byproducts given; | A 10% B 7% C 45% D 3% |
β-chlorovinyltrimethylsilane
A
1,2-Dichloroethylene
B
Trimethyl-(pentachlorethyl)-silan
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With chlorine for 5h; Further byproducts given; | A 7% B 14% C 45% D 3% |
N,N-dichloro-p-toluenesulfonamide
1,2-Dichloroethylene
A
N-(2,2,2-trichloroethyliden)-p-toluenesulfonamide
B
Trichloroethylene
C
N-(2,2-dichloro-1-{[(4-methylphenyl)sulfonyl]amino}ethyl)-4-methylbenzenesulfonamide
D
toluene-4-sulfonamide
E
N-[2,2-Dichloro-eth-(E)-ylidene]-4-methyl-benzenesulfonamide
F
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 55℃; for 22h; Product distribution; other time, other temperature, other initiator; | A n/a B n/a C 44.1% D n/a E n/a F n/a |
Conditions | Yield |
---|---|
With hexacarbonyl molybdenum at 140℃; for 3h; further reagent Fe(CO)5; | A 42% B 23% |
With iron pentacarbonyl at 140℃; for 3h; further reagent Mo(CO)6; | A 27% B 23% |
1,2-Dichloroethylene
N,N-dichloro-4-chlorobenzenesulfonamide
A
1,1,2,2-tetrachloroethylene
B
4-Chlorobenzenesulfonamide
C
N-(2,2,2-trichloroethylidene)-4-chlorobenzenesulfonamide
D
N-(2,2-dichloroethylidene)-p-chlorobenzenesulfonamide
E
N-<2,2-dichloro-1-(N-p-chlorobenzenesulfonamido)ethyl>-p-chlorobenzenesulfonamide
F
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 55℃; for 22h; Product distribution; other time, other temperature, other initiator; | A n/a B n/a C n/a D n/a E 40.4% F n/a |
4-Phenylbutyric acid
A
Propylbenzene
B
1,6-diphenylhexane
D
1-fluoro-3-phenylpropane
E
1-fluoro-1-phenylpropane
F
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With xenon fluoride In dichloromethane at 20℃; for 14 - 18h; Inert atmosphere; | A 18% B 11% C 12% D 32% E 6% F 14% |
chloroform
aniline
A
dichloromethane
B
phenyl isocyanate
C
Azobenzene
D
N-phenylphenylene-1,4-diamine
E
N-phenyl-1,2-benzenediamine
F
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 15℃; for 24h; Product distribution; Mechanism; Irradiation; | A n/a B 30.2% C 12.5% D 10.5% E 18.4% F n/a |
Conditions | Yield |
---|---|
With chlorine at 80 - 95℃; unter Ausschluss von Sauerstoff; | |
With sulfuryl dichloride; dibenzoyl peroxide |
diethyl ether
hexachloroethane
ethylmagnesium bromide
A
1,1,2,2-tetrachloroethylene
B
1,1,1,2-tetrachoroethane
C
pentachloroethane
D
1,1,2,2-tetrachloroethane
diethyl ether
hexachloroethane
A
1,1,2,2-tetrachloroethylene
B
1,1,1,2-tetrachoroethane
C
pentachloroethane
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With chlorine im UV-Licht; |
Conditions | Yield |
---|---|
With hydrogenchloride; kieselguhr; air; copper dichloride |
chloroform
A
tetrachloromethane
B
1,1,2,2-tetrachloroethylene
C
pentachloroethane
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
beim Durchgang des elektrischen Lichtbogens; weitere Produkten: Hexachloraethan, Hexachlorbenzol, HCl und Kohle; |
1,1,2-trichloro-2-iodo-ethane
A
1,2-Dichloroethylene
B
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
bei der Destillation; |
Trichloroethylene
A
1,1,2,2-tetrachloroethylene
B
1,1,2,4,4-pentachloro-1,3-butadiene
C
1,1,1,2-tetrachoroethane
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
at 200 - 250℃; under 934095 Torr; Produkt5:Pentachloraethan.Pyrolysis; |
Conditions | Yield |
---|---|
With phosphorus pentachloride |
1-chloro-2-dichloroiodanyl-ethene
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With aluminium trichloride at 70 - 75℃; Einleiten Chlor und gleichzeitig Acetylen,auschliessend jede Spur von Luft; |
diethyl ether
hexachloroethane
para-methylphenylmagnesium bromide
A
1,1,2,2-tetrachloroethylene
B
1,1,1,2-tetrachoroethane
C
pentachloroethane
D
1,1,2,2-tetrachloroethane
diethyl ether
hexachloroethane
1-naphthylmagnesiumbromide
A
1,1,2,2-tetrachloroethylene
B
1,1,1,2-tetrachoroethane
C
pentachloroethane
D
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With chlorine | |
With chlorine; 1,1,2,2-tetrachloroethane | |
With chlorine; iron(III) chloride |
Conditions | Yield |
---|---|
With chlorine; iron(III) chloride; 1,1,2,2-tetrachloroethane at 135℃; |
Conditions | Yield |
---|---|
In water; butan-1-ol mixing Cu(OH)2 and amine in n-BuOH, stirring (room temp., 10 min), addn.of C2H2Cl4, refluxing (8 h; pptn.), addn. of water, stirring, sepd. of aq. layer, filtration of aq. layer, washing (n-BuOH), crystn. on volume reduction and standing (refrigerator); treating of crude product with mixt. of ether/benzene (1/1) on filtration paper, washing (ether), drying (reduced pressure); elem. anal.; | 95.6% |
Conditions | Yield |
---|---|
In water; butan-1-ol refluxing in butanol (10 h), extraction (water); pptn. from aq. phase (concn., cooling); elem. anal.; | 95% |
Conditions | Yield |
---|---|
With hydrogen fluoride; antimonypentachloride at 80 - 90℃; Autoclave; | 92.3% |
With hydrogen fluoride; antimonypentachloride; chlorine at 120℃; |
Conditions | Yield |
---|---|
at 140℃; for 72h; | 92% |
Conditions | Yield |
---|---|
at 140℃; for 72h; | 91% |
1-naphthol-2-sulfonic acid
1,1,2,2-tetrachloroethane
4-hydroxy-naphthalene-1,3-disulfonic acid
Conditions | Yield |
---|---|
90% |
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With N-Bromosuccinimide; dibenzoyl peroxide | 90% |
trans-[Cl2(pyrazine)4ruthenium(II)]
silver trifluoromethanesulfonate
butan-1-ol
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
In 1,1,2,2-tetrachloroethylene; butan-1-ol a soln. of Ag salt (n-butanol) added dropwise to a soln. of Ru compd. (TCE), stored for 1 h; ppt. filtered, washed (n-butanol), dried (vac., 3 h); elem. anal.; | 90% |
iron(II) acetate
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With acetic anhydride In acetic acid stirring at 100°C for ca. 1 h in 1:1 mixture of AcOH and CHCl2CHCl2; evapn., dissolution in CHCl2CHCl2, filtration, evapn.; elem. anal.; | 90% |
1,1,2,2-tetrachloroethane
1,2,2-trichloroethyl fluosulfate
Conditions | Yield |
---|---|
With chlorine fluorosulfate 1.) -30 deg C, 1 h, 2.) 20 deg C, 2.5 h, 3.) 60 deg C, 1 h; | 88.7% |
Conditions | Yield |
---|---|
In butan-1-ol byproducts: HCl; equimolar mixt. of Ni(OH)2, 1,1,2,2-tetrachloroethane and 1,3-diaminopropane in n-butanol stirred at room temp.; refluxed for ca. 8 h; stirred for ca. 12 min with water; filtered; aq. layer of filtrate sepd.; concd.; refrigerated; crystals washed with n-butanol and petroleum ether; elem. anal.; | 88% |
dichlorotetrakis(triphenylphosphine)ruthenium(II)
2,3-S(C2H4S)2-1,4-Me2C10H4
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
In diethyl ether under Ar atm. mixt. ligand and (RuCl2(PPh3)4) in Et2O at room temp. for 5 min; ppt. was extd. with CH2Cl2, solvent was evapd, residue was crystd. from 1,1,2,2-tetrachloroethane-Et2O; elem. anal.; | 88% |
Conditions | Yield |
---|---|
In butan-1-ol byproducts: HCl; Ni(OH)2 added to soln. of 1,1,2,2-tetrachloroethane and 1,2-diaminoethane (molar ratio 1:1:1) in n-butanol; stirred and refluxed for ca. 7 h; cooled; stirred for ca. 10 min with water; filtered; aq. layer of filtrate sepd.; concd.; refrigerated; crystals washed with n-butanol and petroleum ether; elem. anal.; | 86% |
1,2-dimethoxybenzene
4-chloro-benzoyl chloride
1,1,2,2-tetrachloroethane
4-chloro-3',4'-dimethoxy benzophenone
Conditions | Yield |
---|---|
With FeCl3; graphite | 84.3% |
With FeCl3; graphite | 84.3% |
graphite | 81.3% |
N-allyl-N-phenyl-2-methacrylamide
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
With tris(2,2'-bipyridyl)ruthenium dichloride; 4-methoxybenzenediazonium tetrafluoroborate; sodium carbonate In neat (no solvent) at 50℃; for 20h; Inert atmosphere; Schlenk technique; Irradiation; | A 83% B n/a |
1,2-dimethoxybenzene
4-chlorotrichloromethylbenzene
1,1,2,2-tetrachloroethane
4-chloro-3',4'-dimethoxy benzophenone
Conditions | Yield |
---|---|
graphite In water | 79.5% |
Conditions | Yield |
---|---|
With tetrakis(acetonitrile)copper(I)tetrafluoroborate; 4-methoxybenzenediazonium tetrafluoroborate; sodium carbonate at 80℃; for 6h; Schlenk technique; Inert atmosphere; | 77% |
Conditions | Yield |
---|---|
With hydrogenchloride; oxygen at 379.84℃; Reagent/catalyst; Temperature; | 74.3% |
With chlorine at 379.84℃; Gas phase; chemoselective reaction; | 57.3% |
at 350 - 400℃; bei der Einwirkung von Luft; |
bis(N,N'-diphenyl-2,4-pentanediiminato)chromium(II)
1,1,2,2-tetrachloroethane
bis(N,N'-diphenyl-2,4-pentanediiminato)chlorochromium(III)
Conditions | Yield |
---|---|
In diethyl ether standard Schlenk techniques; tetrachloroethane added to soln. of Cr complex (molar ratio 1:2) in Et2O with stirring; stirred overnight; solvent evapd.; extd. with Et2O; evapd. slowly at room temp.; elem. anal.; | 73% |
Conditions | Yield |
---|---|
In carbon dioxide; N,N-dimethyl-formamide | 70% |
1,1,2,2-tetrachloroethane
A
1,1,2,2-tetrachloroethylene
B
Trichloroethylene
Conditions | Yield |
---|---|
With hydrogenchloride; oxygen at 379.84℃; for 18h; | A 20.8% B 64.3% |
With CuCl2/KCl/attapulgite; chlorine at 379.84℃; Gas phase; chemoselective reaction; | A 16.6% B 45% |
1,1,2,2-tetrachloroethane
A
1,1,2,2-tetrachloroethylene
B
Trichloroethylene
C
pentachloroethane
Conditions | Yield |
---|---|
With hydrogenchloride; oxygen at 379.84℃; | A 20.8% B 64.3% C 6.1% |
1,1,2,2-tetrachloroethane
Conditions | Yield |
---|---|
In 1,3,5-trimethyl-benzene at 170℃; for 18h; Inert atmosphere; Schlenk technique; | 60% |
Conditions | Yield |
---|---|
Stage #1: oxalic acid; 1,1,2,2-tetrachloroethane With sulfuric acid for 10h; Stage #2: With sulfur trioxide; mercury(II) sulfate at 60℃; | 58.8% |
Conditions | Yield |
---|---|
56% |
The 1,1,2,2-Tetrachloroethane , with the CAS register number 79-34-5, could also be called as (CHCl2)2;1,1,2,2,-tetrachlor-ethane ; 1,1,2,2-Czterochloroetan ; 1,1,2,2-czterochloroetan(polish) ; 1,1,2,2-tce ; 1,1,2,2-Tetrachloorethaan ; 1,1,2,2-Tetrachloraethan ; 1,1,2,2-Tetrachlorethan .
The physical properties of this chemcial are as followings: (1)ACD/LogP: 2.17 ; (2)ACD/LogD (pH 5.5): 2.17 ; (3)ACD/LogD (pH 7.4): 2.17 ; (4)ACD/BCF (pH 5.5): 26.37 ; (5)ACD/BCF (pH 7.4): 26.37 ; (6)ACD/KOC (pH 5.5): 362.07 ; (7)ACD/KOC (pH 7.4): 362.07 ; (8)#Freely Rotating Bonds: 1; (9)Index of Refraction: 1.479 ; (10)Molar Refractivity: 30.62 cm3 ; (11)Molar Volume: 107.8 cm3 ; (12)Polarizability: 12.14 ×10-24 cm3 ; (13)Surface Tension: 33.9 dyne/cm ; (14)Density: 1.556 g/cm3 ; (15)Flash Point: 42.6 °C ; (16)Enthalpy of Vaporization: 37.64 kJ/mol ; (17)Boiling Point: 142 °C at 760 mmHg ; (18)Vapour Pressure: 7.14 mmHg at 25°C.
This is a kind of colorless liquid and is complete soluble in Methanol, ethanol, ethyl ether, chloroform, benzene, carbon tetrachloride, carbon bisulfide, petroleum ether, DMF and other oils but insoluble in water. And it could volatilize with steam. Besides, it is incompatible with strong oxidizing agents, strong bases and can react violently with sodium, potassium, nitrates, 2,4-dinitrophenyl disulphide. As for its usage, it could be used as solvent and analytical reagent and it could also be as the metal detergent, pesticide, and other phytocide.
As for its product categories, there are vairous, including Intermediates of Dyes and Pigments; refrigerants; Organics; Analytical Chemistry; Standard Solution of Volatile Organic Compounds for Water & Soil Analysis; Standard Solutions (VOC); Alpha Sort; Chemical Class; ChloroPesticides; FumigantsVolatiles/ Semivolatiles; Halogenated; Insecticides; TA - TE; T-ZAlphabetic.
Being a kind of very toxic chemical, it may at very low levels cause damage to health and it is dangerous when by inhalation or in contact with skin, and it has the danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed. Besides, it is dangerous for the environment, for it may present an immediate or delayed danger to one or more components of the environment and it is toxic to the aquatic organisms and may cause long-term adverse effects in the aquatic environment. Besides, it is dangerous for the ozone layer. Except all these, it is a kind of highly flammable chemical, as it may catch fire in contact with air, only needing brief contact with an ignition source and it has a very low flash point or evolve highly flammable gases in contact with water.
Because of these dangerous possibilities, you should be very cautious while dealing with it. Wear suitable protective clothing and gloves. If in case of insufficient ventilation, wear suitable respiratory equipment and if in case of accident or if you feel unwell seek medical advice immediately (show the label where possible). Besides, Avoid releasing to the environment and refer to special instructions/safety data sheet. Yuo could obtain more safety information from WGK Germany 3. When store it, it should be kept in the ventilating dry and cool storeroom, and away from those oxygenant and other food additives.
When it comes to its preparation products, there are including chloroacetic acid, trichloroethylene, thiophosgene, hexachloroethane, 4-vinylbenzyl chloride, decabromodiphenyl oxide, pentachloroethane. And its raw materials are including ferric chloride, antimony(v) chloride.
Additionally, you could convert the following data information into the molecular structure:
SMILES:ClC(Cl)C(Cl)Cl
InChI:InChI=1/C2H2Cl4/c3-1(4)2(5)6/h1-2H
InChIKey:QPFMBZIOSGYJDE-UHFFFAOYAH
Below are the toxicity information of this chemical:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
cat | LCLo | inhalation | 19gm/m3/45M (19000mg/m3) | SENSE ORGANS AND SPECIAL SENSES: LACRIMATION: EYE BEHAVIORAL: GENERAL ANESTHETIC GASTROINTESTINAL: CHANGES IN STRUCTURE OR FUNCTION OF SALIVARY GLANDS | Archiv fuer Hygiene und Bakteriologie. Vol. 116, Pg. 131, 1936. |
dog | LDLo | intravenous | 50mg/kg (50mg/kg) | Quarterly Journal of Pharmacy & Pharmacology. Vol. 7, Pg. 205, 1934. | |
dog | LDLo | oral | 300mg/kg (300mg/kg) | LIVER: "HEPATITIS (HEPATOCELLULAR NECROSIS), ZONAL" BEHAVIORAL: SLEEP LIVER: FATTY LIVER DEGERATION | American Journal of Hygiene. Vol. 16, Pg. 325, 1932. |
guinea pig | LDLo | intraperitoneal | 500mg/kg (500mg/kg) | LIVER: FATTY LIVER DEGERATION | American Industrial Hygiene Association Journal. Vol. 35, Pg. 21, 1974. |
human | TCLo | inhalation | 1000mg/m3/30M (1000mg/m3) | BEHAVIORAL: SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) BEHAVIORAL: "HALLUCINATIONS, DISTORTED PERCEPTIONS" | Archiv fuer Hygiene und Bakteriologie. Vol. 116, Pg. 131, 1936. |
human | TDLo | oral | 30mg/kg (30mg/kg) | BEHAVIORAL: GENERAL ANESTHETIC | Pesticide Chemicals Official Compendium, Association of the American Pesticide Control Officials, Inc., 1966. Vol. -, Pg. 1110, 1966. |
mouse | LC50 | inhalation | 4500mg/m3/2H (4500mg/m3) | "Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure," Izmerov, N.F., et al., Moscow, Centre of International Projects, GKNT, 1982Vol. -, Pg. 107, 1982. | |
mouse | LD50 | intraperitoneal | 821mg/kg (821mg/kg) | Sangyo Igaku. Japanese Journal of Industrial Health. Vol. 8, Pg. 371, 1966. | |
mouse | LD50 | subcutaneous | 1108mg/kg (1108mg/kg) | BEHAVIORAL: SLEEP BEHAVIORAL: ATAXIA | Journal of Pharmacology and Experimental Therapeutics. Vol. 123, Pg. 224, 1958. |
rabbit | LDLo | subcutaneous | 500mg/kg (500mg/kg) | Quarterly Journal of Pharmacy & Pharmacology. Vol. 7, Pg. 205, 1934. | |
rat | LCLo | inhalation | 1000ppm/4H (1000ppm) | Journal of Industrial Hygiene and Toxicology. Vol. 31, Pg. 343, 1949. | |
rat | LD50 | oral | 200mg/kg (200mg/kg) | Industrial Health. Vol. 32, Pg. 145, 1994. |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View