Conditions | Yield |
---|---|
With mesoporous silica chloride (SBA-Cl) In toluene for 3h; Beckmann rearrangement; Reflux; | 100% |
trimethylsilylperrhenate; 3,5-bis-trifluromethylphenylboronic acid In acetonitrile at 120℃; for 4h; Product distribution / selectivity; Beckmann Rearrangement; Heating / reflux; | 99% |
With p-toluenesulfonyl chloride; zinc(II) chloride In acetonitrile for 1h; Beckmann rearrangement; Inert atmosphere; Reflux; | 99% |
Conditions | Yield |
---|---|
With 4-methyl-morpholine; tetrahydroxydiboron; 5%-palladium/activated carbon In 1,2-dichloro-ethane at 50℃; for 4h; | 100% |
With lithium Zersetzen des Reaktionsprodukts mit Wasser; | |
With calcium Zersetzen des Reaktionsprodukts mit Wasser; | |
With formic acid; C59H60N6O2Pt; N-ethyl-N,N-diisopropylamine In N,N-dimethyl-formamide for 12h; Inert atmosphere; Sealed tube; UV-irradiation; | 62 %Spectr. |
Conditions | Yield |
---|---|
With ammonium formate; titanium(IV) oxide; β‐cyclodextrin In water for 2.5h; Irradiation; Inert atmosphere; | 100% |
Stage #1: nitrobenzene With sodium tetrahydroborate In water at 20℃; for 0.5h; Green chemistry; Stage #2: acetic anhydride In water at 20℃; for 1.83333h; Catalytic behavior; Green chemistry; | 99% |
Stage #1: nitrobenzene With sodium tetrahydroborate; water In neat (no solvent) at 20℃; for 0.0166667h; Stage #2: acetic anhydride In neat (no solvent) at 40℃; for 0.0333333h; Reagent/catalyst; Solvent; | 97% |
Conditions | Yield |
---|---|
With pyridine; aluminum oxide at 93 - 95℃; for 1h; microwave irradiation; | 100% |
In dichloromethane at 20℃; Inert atmosphere; | 100% |
In dichloromethane at 21℃; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
With dmap; 2-chloro-1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-henicosafluorododecyl)pyridinium trifluoromethanesulfonate; triethylamine In N,N-dimethyl-formamide at 20℃; for 1h; | 100% |
With dmap; 2-chloro-1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-henicosafluorododecyl)pyridinium trifluoromethanesulfonate; triethylamine In N,N-dimethyl-formamide at 20℃; for 1h; | 100% |
With zinc(II) oxide for 2.33h; Reflux; chemoselective reaction; | 99% |
Conditions | Yield |
---|---|
With acetamide; potassium phosphate; CuI In dodecane; ethyl acetate; toluene | 100% |
With potassium phosphate; copper(l) iodide; L-arginine In 1,4-dioxane at 100℃; for 24h; Goldberg reaction; | 99% |
With aluminum oxide; potassium fluoride; copper(l) iodide; 1,10-Phenanthroline In toluene at 110℃; for 5h; | 97% |
Conditions | Yield |
---|---|
With zinc diacetate for 2h; Heating; | 100% |
In toluene for 24h; Yield given; |
Conditions | Yield |
---|---|
With indium; acetic acid In methanol at 20℃; for 1h; | 100% |
With nickel In isopropyl alcohol for 20h; Heating; | 81% |
With tri-n-butyl-tin hydride; 2,2'-azobis(isobutyronitrile) In toluene for 14h; Heating; | 81% |
Multi-step reaction with 2 steps 1: 64 percent / NaBH4, 5percent aq. NaOH / ethanol 2: 24 percent / lithium 2-thienyltellurolate / tetrahydrofuran / 0.5 h View Scheme |
Conditions | Yield |
---|---|
With 4-methyl-morpholine; tetrahydroxydiboron; 5%-palladium/activated carbon In 1,2-dichloro-ethane at 50℃; for 1h; | 100% |
Conditions | Yield |
---|---|
With C33H37N4P; potassium carbonate; bis(dibenzylideneacetone)-palladium(0) In tert-butyl alcohol at 95℃; for 18h; Catalytic behavior; Solvent; Temperature; Reagent/catalyst; Time; Inert atmosphere; Sonication; | 99.1% |
With 5-(di-tert-butylphosphino)-1′, 3′, 5′-triphenyl-1′H-[1,4′]bipyrazole; bis[chloro(1,2,3-trihapto-allylbenzene)palladium(II)]; potassium carbonate In 1,4-dioxane at 90℃; for 18h; Buchwald-Hartwig Coupling; Inert atmosphere; Glovebox; | 80% |
With potassium phosphate; copper(l) iodide In N,N-dimethyl-formamide at 120℃; for 48h; Ullmann condensation; | 33% |
With copper(l) iodide; potassium carbonate; pipecolic Acid In N,N-dimethyl-formamide at 110℃; for 30h; Goldberg coupling reaction; | 24% |
With C33H37N4P; potassium carbonate; bis(dibenzylideneacetone)-palladium(0) In tert-butyl alcohol at 95℃; for 18h; Catalytic behavior; Reagent/catalyst; Solvent; Inert atmosphere; Sonication; |
(E)-1-phenylethanone oxime
Acetanilid
Conditions | Yield |
---|---|
With 1,3,5-trichloro-2,4,6-triazine; zinc(II) chloride In acetonitrile for 2h; Beckmann rearrangement; Heating; | 99% |
With 2,4,6-tripropyl-1,3,5,2,4,6-trioxatriphosphinane-2,4,6-trioxide In tetrahydrofuran; ethyl acetate at 70℃; for 2h; Beckmann rearrangement; Inert atmosphere; | 99% |
With oxalyl dichloride at 0 - 20℃; for 2h; Catalytic behavior; Reagent/catalyst; Time; Beckmann Rearrangement; | 99% |
Conditions | Yield |
---|---|
With 6H(1+)*Mo9O40PV3(6-); oxygen In acetonitrile at 60℃; under 760.051 Torr; for 0.5h; Inert atmosphere; Glovebox; | 99% |
With eosin; oxygen In N,N-dimethyl-formamide at 20℃; for 6h; Reagent/catalyst; Solvent; Irradiation; Green chemistry; | 93% |
With P,P-dichlorophenylphosphine oxide In acetonitrile at -4℃; for 3h; | 90% |
Conditions | Yield |
---|---|
With ruthenium(III) 2,4-pentanedionate at 25℃; for 0.0833333h; | 99% |
In water at 80℃; for 0.0833333h; Microwave irradiation; Green chemistry; chemoselective reaction; | 98% |
With thermally decomposed Ni-Fe-hydrotalcite at 26.84℃; for 0.0166667h; Neat (no solvent); | 97% |
Conditions | Yield |
---|---|
With immobilization of Candida cylindracea lipase In hexane at 55℃; for 28h; | 99% |
With 1-(3-sulfopropyl)pyridinium phosphotungstate In neat (no solvent) at 120℃; for 1h; Microwave irradiation; | 92% |
With Candida antarctica lipase B; acetone oxime In tert-butyl methyl ether at 20℃; for 4h; Molecular sieve; | 84% |
Acetic acid 3,6-diisobutyl-pyrazin-2-yl ester
aniline
A
Acetanilid
B
2-hydroxy-3,6-diisobutylpyrazine
Conditions | Yield |
---|---|
In benzene for 15h; Ambient temperature; | A 99% B n/a |
In benzene for 15h; Product distribution; Ambient temperature; | A 99% B n/a |
(Z)-N′-phenylbenzimidamide
A
N1-(N-phenylcarbamoyl)-N2-phenylbenzimidamide
B
Acetanilid
Conditions | Yield |
---|---|
With [bis(acetoxy)iodo]benzene In toluene at 110℃; | A 99% B 80% |
N-phenylbenzamidine
A
N1-(N-Phenylcarbamoyl)-N2-phenylbenzimidamide
B
Acetanilid
Conditions | Yield |
---|---|
With [bis(acetoxy)iodo]benzene In toluene at 110℃; | A 99% B 80% |
Conditions | Yield |
---|---|
With aluminum oxide at 200℃; under 37503.8 Torr; for 0.45h; Reagent/catalyst; Temperature; Sonication; Green chemistry; | 99% |
Stage #1: aniline With tetrafluoroboric acid In water Stage #2: acetonitrile With potassium phosphate; water at 80℃; for 12h; Temperature; Reagent/catalyst; Inert atmosphere; | 89% |
With tert.-butylnitrite; tetrabutylammomium bromide; water; toluene-4-sulfonic acid at 60℃; for 23h; | 87% |
Conditions | Yield |
---|---|
With iodine at 85 - 90℃; for 0.0833333h; | 99% |
With iron(III) trifluoromethanesulfonate at 20℃; for 24h; Schlenk technique; | 85% |
With 1,2,4-Triazole; 1,8-diazabicyclo[5.4.0]undec-7-ene In acetonitrile at 20℃; for 10h; | 69% |
In neat (no solvent) at 20℃; for 24h; Concentration; Time; Green chemistry; | 69% |
With cell-free extract containing recombinant PpATaseCH In aq. phosphate buffer; dimethyl sulfoxide at 35℃; for 18h; pH=7.5; |
Conditions | Yield |
---|---|
With oxygen; sodium hydroxide In water at 40℃; for 18h; Green chemistry; | 99% |
With oxygen; sodium hydroxide In water at 40℃; for 24h; Reagent/catalyst; | 99% |
With oxygen; lithium hydroxide In water at 50℃; for 12h; | 86% |
Conditions | Yield |
---|---|
With N-methyl-N-[3-(4-diacetoxyiodo)phenoxy-1-propyl]pyrrolidinium 4-methylbenzenesulfonate; potassium hydroxide In chloroform at 0 - 20℃; Hofmann Rearrangement; Inert atmosphere; | 99% |
Conditions | Yield |
---|---|
Stage #1: phenyl isocyanate; bis(iodozinc)methane at 80℃; for 0.5h; Stage #2: at 25℃; Acidic conditions; | 99% |
In tetrahydrofuran at 80℃; for 0.5h; Solvent; | 99% |
4-(phenylamino)pent-3-en-2-one
Acetanilid
Conditions | Yield |
---|---|
With dihydrogen peroxide In water at 20℃; for 0.5h; Green chemistry; | 99% |
With 2,2'-azobis(isobutyronitrile); oxygen In acetonitrile at 80℃; for 12h; Sealed tube; | 80% |
With tert.-butylhydroperoxide In water; chlorobenzene at 80℃; for 2h; | 75% |
With 5,6-bis(5-methoxythiophen-2-yl)pyrazine-2,3-dicarbonitrile; oxygen In acetonitrile at 25℃; for 12h; Solvent; Irradiation; chemoselective reaction; | 74% |
o-iodoacetanilide
Acetanilid
Conditions | Yield |
---|---|
With 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline bis[(2-diphenyl-phosphino)phenyl]ether copper(I) hexafluorophosphate; N-ethyl-N,N-diisopropylamine In acetonitrile at 20℃; for 16h; Inert atmosphere; Sealed tube; Irradiation; | 99% |
With 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline bis[(2-diphenyl-phosphino)phenyl]ether copper(I) hexafluorophosphate; N-ethyl-N,N-diisopropylamine In acetonitrile at 20℃; for 16h; UV-irradiation; | 99% |
With copper acetylacetonate; diethylamine; vasicine In ethanol at 100℃; for 12h; Time; Sealed tube; | 88% |
With copper acetylacetonate; ethanol; diethylamine; vasicine at 100℃; for 12h; Sealed tube; regioselective reaction; | 86% |
With potassium phosphate; palladium diacetate; hydrazine hydrate In dimethyl sulfoxide; N,N-dimethyl-formamide at 20℃; for 8h; Green chemistry; | 83% |
Conditions | Yield |
---|---|
at 20℃; for 0.5h; Reflux; | 98% |
for 0.5h; Reflux; | 98% |
Conditions | Yield |
---|---|
With Fe3+ exchanged montmorillonite K-10 In neat (no solvent) at 110℃; for 30h; Catalytic behavior; Reagent/catalyst; Temperature; Inert atmosphere; | 98% |
With dipotassium peroxodisulfate In water at 100℃; for 0.166667h; Solvent; Temperature; Time; Reagent/catalyst; Microwave irradiation; Green chemistry; | 97% |
With [Ru-NHC] In toluene at 110℃; for 8h; Catalytic behavior; Solvent; Temperature; Reagent/catalyst; Inert atmosphere; Schlenk technique; Sealed tube; | 94% |
Conditions | Yield |
---|---|
With acetylhydroxamic acid; sulfuric acid In acetonitrile for 0.5h; Reflux; | 98% |
With mesitylenesulfonylhydroxylamine In acetonitrile at 20℃; for 5h; Reagent/catalyst; Solvent; | 98% |
With zinc(II) chloride; hydroxylamine-O-sulfonic acid In water at 20℃; for 8h; Reagent/catalyst; Solvent; Beckmann Rearrangement; | 96% |
Conditions | Yield |
---|---|
In tetrahydrofuran at 15℃; for 0.166667h; | 98% |
m-4-acetamidophenyl trifluoromethanesulfonate
Acetanilid
Conditions | Yield |
---|---|
With 4-methyl-morpholine; tetrahydroxydiboron; 5%-palladium/activated carbon In 1,2-dichloro-ethane at 50℃; for 5h; | 98% |
With ammonium acetate; magnesium; palladium on activated charcoal In methanol at 20℃; for 1h; | 97% |
With ammonium acetate; methanol; magnesium; palladium on activated charcoal at 20℃; for 1h; | 97% |
2-acetoxy-5-chloro-3,6-diisopropylpyrazine
aniline
A
5-chloro-3,6-diisopropyl-2-hydroxypyrazine
B
Acetanilid
Conditions | Yield |
---|---|
In benzene for 15h; Ambient temperature; | A n/a B 98% |
In benzene for 15h; Product distribution; Ambient temperature; | A n/a B 98% |
Conditions | Yield |
---|---|
With 1,3-Diiodo-5,5-dimethyl-2,4-imidazolidinedione; 4,4'-dimethoxyphenyl disulfide In acetonitrile at 20℃; for 0.5h; Catalytic behavior; Reagent/catalyst; Solvent; regioselective reaction; | 100% |
With In(OSO2CF3)3; Iodine monochloride In dichloromethane; acetonitrile at 20℃; for 0.5h; | 99% |
With trichloroisocyanuric acid; iodine In acetonitrile at 20℃; regioselective reaction; | 99% |
Conditions | Yield |
---|---|
With 1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione; 4,4'-dimethoxyphenyl disulfide In acetonitrile at 20℃; for 0.166667h; Reagent/catalyst; | 100% |
With 1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione; 4,4'-dimethoxyphenyl disulfide In acetonitrile at 20℃; for 0.166667h; | 100% |
With methanol; tetraethylammonium chloride; bromine In dichloromethane at 35℃; | 99% |
N,N-dimethyl-formamide
Acetanilid
N1,N1-dimethyl-N2-phenylformamidine
Conditions | Yield |
---|---|
With trichlorophosphate for 4h; Heating; | 100% |
With trichlorophosphate In toluene at 90℃; for 2h; | 89% |
Conditions | Yield |
---|---|
With tert.-butylhydroperoxide; palladium diacetate; sodium dodecyl sulfate; trifluoroacetic acid In water at 20℃; for 24h; regioselective reaction; | 100% |
With tert.-butylhydroperoxide; sodium dodecyl-sulfate; palladium diacetate; trifluoroacetic acid In water at 20℃; for 24h; | 97% |
With tert.-butylhydroperoxide; palladium(II) trifluoroacetate In toluene at 20 - 90℃; | 81% |
Conditions | Yield |
---|---|
In toluene Reflux; | 100% |
Conditions | Yield |
---|---|
With 2,6-dimethylpyridine; dmap; di-tert-butyl dicarbonate In acetonitrile at 20 - 28℃; for 24h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
With N-chloro-N-(benzenesulfonyl)benzenesulfonamide In acetonitrile at 20 - 25℃; for 0.166667h; Green chemistry; | 99.9% |
With hydrogenchloride; 1-chloro-2,2,6,6-tetramethylpiperidine In benzene at 50 - 60℃; | 92% |
With sodium perborate; potassium chloride; sodium tungstate In acetic acid at 20℃; for 1.08333h; Chlorination; | 86% |
Conditions | Yield |
---|---|
With sodium nitrate; sulfuric acid at 0 - 5℃; for 3h; | 99% |
With ammonium molybdate; water; nitric acid In chloroform for 6h; Nitration; Heating; | 99% |
With nitric acid; cetyltrimethylammonim bromide In acetonitrile at 24.84℃; for 2h; Micellar solution; regioselective reaction; | 85% |
2-methoxybenzo[d][1,3]dithiole
Acetanilid
A
dibenzotetrathiafulvalene
B
N-Benzo[1,3]dithiol-2-yl-N-phenyl-acetamide
Conditions | Yield |
---|---|
With trichloroacetic acid In benzene for 9h; Heating; | A n/a B 99% |
Acetanilid
3-Chloro-2-methylpropene
N-(2-methylprop-2-ene-1-yl)-N-phenylacetamide
Conditions | Yield |
---|---|
With sodium hydroxide; tetrabutylammomium bromide In toluene at 75℃; for 2.25h; | 99% |
With tetrabutylammomium bromide; potassium carbonate; sodium hydroxide In toluene at 75℃; | 85% |
Conditions | Yield |
---|---|
With silver hexafluoroantimonate; dichloro[1,3-di(ethoxycarbonyl)-2,4,5-trimethylcyclopentadienyl]rhodium(III) dimer; copper diacetate In acetone at 20℃; for 16h; | 99% |
With silver hexafluoroantimonate; dichloro[1,3-di(ethoxycarbonyl)-2,4,5-trimethylcyclopentadienyl]rhodium(III) dimer; copper(II) acetate monohydrate In acetone at 20℃; for 72h; Reagent/catalyst; Sealed tube; | 99% |
With silver hexafluoroantimonate; rhodium(III) trichloride hydrate; 2-[4,6-diphenyl-1H-cyclopenta[c]furan-5(3H)-ylidene]-N-phenylacetamide; copper(II) acetate monohydrate In ethanol; acetone at 20℃; for 40h; Catalytic behavior; Reagent/catalyst; Time; Schlenk technique; Inert atmosphere; Sealed tube; | 99% |
The Acetanilide, with the CAS registry number 103-84-4 and EINECS registry number 203-150-7, has the systematic name of N-phenylacetamide, and it is also known as Antifebrin. It is an odourless solid chemical of leaf or flake-like appearance, and the pure crystals are plate shaped and colorless to white. It is slightly soluble in water, and stable under most conditions. The molecular formula of this chemical is C8H9NO.
The physical properties of Acetanilide are as followings: (1)ACD/LogP: 1.08; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 1.08; (4)ACD/LogD (pH 7.4): 1.08; (5)ACD/BCF (pH 5.5): 3.91; (6)ACD/BCF (pH 7.4): 3.91; (7)ACD/KOC (pH 5.5): 92.44; (8)ACD/KOC (pH 7.4): 92.44; (9)#H bond acceptors: 2; (10)#H bond donors: 1; (11)#Freely Rotating Bonds: 1; (12)Polar Surface Area: 20.31 Å2; (13)Index of Refraction: 1.575; (14)Molar Refractivity: 40.52 cm3; (15)Molar Volume: 122.5 cm3; (16)Polarizability: 16.06×10-24cm3; (17)Surface Tension: 41.5 dyne/cm; (18)Density: 1.103 g/cm3; (19)Flash Point: 173.9 °C; (20)Enthalpy of Vaporization: 54.49 kJ/mol; (21)Boiling Point: 304.5 °C at 760 mmHg; (22)Vapour Pressure: 0.000871 mmHg at 25°C.
Preparation of Acetanilide: It can be prepared by reacting acetic anhydride with aniline:
C6H5NH2 + (CH3CO)2O → C6H5NHCOCH3 + CH3COOH
Applictions of Acetanilide: It is often used as an inhibitor in hydrogen peroxide to stabilize cellulose ester varnishes. It is also used in the intermediation in rubber accelerator synthesis, dyes and dye intermediate synthesis, camphor synthesis and so on. It is used for the production of 4-acetamidobenzenesulfonyl chloride, a key intermediate for the manufacture of the sulfa drugs as well. What's more, it is also a precursor in the synthesis of penicillin and other pharmaceuticals.
You should be cautious while dealing with this chemical. It irritates to eyes, respiratory system and skin, and it is also harmful if swallowed. Therefore, you had better take the following instructions: Do not breathe dust; Wear suitable protective clothing, gloves and eye/face protection, and in case of contacting with eyes, rinse immediately with plenty of water and seek medical advice.
You can still convert the following datas into molecular structure:
(1)SMILES: O=C(Nc1ccccc1)C
(2)InChI: InChI=1/C8H9NO/c1-7(10)9-8-5-3-2-4-6-8/h2-6H,1H3,(H,9,10)
(3)InChIKey: FZERHIULMFGESH-UHFFFAOYAA
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
cat | LDLo | intravenous | 8500ug/kg (8.5mg/kg) | Journal of the American Pharmaceutical Association, Scientific Edition. Vol. 30, Pg. 91, 1941. | |
cat | LDLo | oral | 250mg/kg (250mg/kg) | Journal of the American Pharmaceutical Association. Vol. 28, Pg. 70, 1939. | |
dog | LDLo | intravenous | 300mg/kg (300mg/kg) | "Abdernalden's Handbuch der Biologischen Arbeitsmethoden." Vol. 4, Pg. 1290, 1935. | |
dog | LDLo | oral | 500mg/kg (500mg/kg) | "Abdernalden's Handbuch der Biologischen Arbeitsmethoden." Vol. 4, Pg. 1290, 1935. | |
guinea pig | LDLo | oral | 200mg/kg (200mg/kg) | "Abdernalden's Handbuch der Biologischen Arbeitsmethoden." Vol. 4, Pg. 1290, 1935. | |
human | TDLo | oral | 14mg/kg/D (14mg/kg) | LUNGS, THORAX, OR RESPIRATION: CYANOSIS KIDNEY, URETER, AND BLADDER: "CHANGES IN TUBULES (INCLUDING ACUTE RENAL FAILURE, ACUTE TUBULAR NECROSIS)" BLOOD: METHEMOGLOBINEMIA-CARBOXYHEMOGLOBIN | "Toxicology of Drugs and Chemicals," Deichmann, W.B., New York, Academic Press, Inc., 1969Vol. -, Pg. 62, 1969. |
man | LDLo | oral | 56mg/kg/H-I (56mg/kg) | BEHAVIORAL: "HALLUCINATIONS, DISTORTED PERCEPTIONS" GASTROINTESTINAL: DECREASED MOTILITY OR CONSTIPATION | American Journal of the Medical Sciences. Vol. 122, Pg. 770, 1901. |
man | LDLo | unreported | 59mg/kg (59mg/kg) | "Poisoning; Toxicology, Symptoms, Treatments," 2nd ed., Arena, J.M., Springfield, IL, C.C. Thomas, 1970Vol. 2, Pg. 73, 1970. | |
man | TDLo | oral | 405mg/kg (405mg/kg) | BEHAVIORAL: SLEEP LUNGS, THORAX, OR RESPIRATION: CYANOSIS LUNGS, THORAX, OR RESPIRATION: RESPIRATORY STIMULATION | JAMA, Journal of the American Medical Association. Vol. 12, Pg. 103, 1889. |
mouse | LD50 | intraperitoneal | 500mg/kg (500mg/kg) | National Technical Information Service. Vol. AD277-689, | |
mouse | LD50 | oral | 1210mg/kg (1210mg/kg) | Toxicology and Applied Pharmacology. Vol. 19, Pg. 20, 1971. | |
rabbit | LDLo | oral | 1500mg/kg (1500mg/kg) | PERIPHERAL NERVE AND SENSATION: SPASTIC PARALYSIS WITH OR WITHOUT SENSORY CHANGE | Journal of Pharmacology and Experimental Therapeutics. Vol. 49, Pg. 466, 1933. |
rat | LD50 | intraperitoneal | 540mg/kg (540mg/kg) | Journal of the American Pharmaceutical Association, Scientific Edition. Vol. 48, Pg. 204, 1959. | |
rat | LD50 | oral | 800mg/kg (800mg/kg) | Journal of Pharmacology and Experimental Therapeutics. Vol. 54, Pg. 159, 1935. |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View