STRONTIUM ACETATE supplier

Name
STRONTIUM ACETATE
EINECS 543-94-2
CAS No. 543-94-2
Article Data6
CAS DataBase
Density 2.099 g/cm3
Solubility soluble in 2.5 parts H2O; slightly soluble alcohol [MER06]
Melting Point >220ºC
Formula C₄H₆O₄Sr
Boiling Point 117.1 °C at 760 mmHg
Molecular Weight 205.709
Flash Point 40 °C
Transport Information
Appearance White crystal powder
Safety 24/25
Risk Codes
Molecular Structure
Hazard Symbols
Synonyms Aceticacid, strontium salt (8CI,9CI);Strontium acetate (6CI,7CI);Strontiumdiacetate;
PSA 37.30000
LogP 0.09090

Synthetic route

: strontium(II) oxide

: 1633-05-2
strontium(II) carbonate

: 64-19-7
acetic acid

: 543-94-2
strontium(II) acetate

Conditions

Conditions	Yield
Ar-atmosphere; glacial CH3COOH, oxide or carbonate;

...Expand

: strontium acetate hemihydrate

: 543-94-2
strontium(II) acetate

Conditions

Conditions	Yield
In neat (no solvent) byproducts: H2O; dehydration of the strontium acetate hydrates;;
In neat (no solvent) byproducts: H2O; dehydration of the strontium acetate hydrates;;

: 6100-93-2, 14692-29-6, 61127-31-9, 67320-13-2
strontium acetate 4-hydrate

: 543-94-2
strontium(II) acetate

Conditions

Conditions	Yield
In neat (no solvent) byproducts: H2O; dehydration of the strontium acetate hydrates;;
In neat (no solvent) byproducts: H2O; dehydration of the strontium acetate hydrates;;

: strontium acetate perchlorate

: 543-94-2
strontium(II) acetate

Conditions

Conditions	Yield
With water strontium acetate perchlorate decomposed with water forming strontium acetate;;
With H2O strontium acetate perchlorate decomposed with water forming strontium acetate;;
With water strontium acetate perchlorate decomposed with water forming strontium acetate;;

: strontium acetate perchlorate

A: strontium(II) perchlorate

B: 543-94-2
strontium(II) acetate

Conditions

Conditions	Yield
In further solvent(s) Sr2(CH3CO2)3ClO4 decomposed with alcohol forming strontium acetate and strontium perchlorate;;
In further solvent(s) Sr2(CH3CO2)3ClO4 decomposed with alcohol forming strontium acetate and strontium perchlorate;;

: 7446-08-4
selenium(IV) oxide

: 543-94-2
strontium(II) acetate

: 10108-64-2
cadmium(II) chloride

: SrCd(SeO3)2

Conditions

Conditions	Yield
With potassium nitrate In water at 210℃; for 96h; High pressure; Autoclave;	92%

...Expand

: TiO(acac)2

: 175844-48-1
3,3'-ethane-1,2-diylbis(1,2-benzendiol)

: 543-94-2
strontium(II) acetate

: 2Sr(2+)*Ti2(C14H10O4)3(4-)*3H2O*3C3H7NO = Sr2[Ti2(C14H10O4)3]*3H2O*3C3H7NO

Conditions

Conditions	Yield
In N,N-dimethyl-formamide stirring overnight; filtration, solvent removal (vac.); elem. anal.;	85%

...Expand

: 1311-10-0
strontium hydroxide

: 543-94-2
strontium(II) acetate

: 125995-03-1
atorvastatin lactone

: [R-(R*,R*)]-2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoate strontium pentahydrate

Conditions

Conditions	Yield
Stage #1: strontium hydroxide; atorvastatin lactone With water In tert-butyl methyl ether; acetone at 20℃; for 3.5h; Stage #2: strontium(II) acetate With water In acetone at 50℃; for 10h; Product distribution / selectivity;	85%

...Expand

: 67-66-3
chloroform

: (HO)2C6H2(CHNOCH2CH2ONCHC6H3(OCH3)OH)2

: 543-94-2
strontium(II) acetate

: 5970-45-6
zinc(II) acetate dihydrate

: O2C6H2(CHNOC2H4ONCHC6H3(OCH3)O)2(4-)*2Zn(2+)*Sr(2+)*2O2CCH3(1-)*0.75CHCl3=C32H32N4O14SrZn2*0.75CHCl3

Conditions

Conditions	Yield
In methanol; chloroform; water a soln. of Zn salt in MeOH and a soln. of Sr salt in H2O/MeOH added to asoln. of ligand in CHCl3; evapd., crystd. by vapor diffusion of Et2O into a CHCl3/MeOH soln.; elem. anal.;	77%

...Expand

: 1311-10-0
strontium hydroxide

: 543-94-2
strontium(II) acetate

: 125995-03-1
atorvastatin lactone

: [R-(R*,R*)]-2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoate strontium

Conditions

Conditions	Yield
Stage #1: strontium hydroxide; atorvastatin lactone In methanol; tert-butyl methyl ether; water at 20℃; for 3.5h; Stage #2: strontium(II) acetate In methanol; tert-butyl methyl ether; water at 50℃; for 19h;	77%

...Expand

: 7440-62-2
vanadium

: 86119-84-8, 7664-38-2
phosphoric acid

: vanadia

: 543-94-2
strontium(II) acetate

: Sr(2+)*2VO(2+)*2PO4(3-)*99H2O=Sr(VOPO4)2*99H2O

Conditions

Conditions	Yield
In water molar ratio V2O5:V:H3PO4:metal acetate:water=1:0.5:23:1:833, Teflon-lined bomb, 200°C, 2 d; collection (filtration), washing (water, Me2CO);	75%

...Expand

: 7440-62-2
vanadium

: vanadia

: 543-94-2
strontium(II) acetate

: 7778-39-4, 121471-47-4
orthoarsenic acid

: Sr(2+)*2VO(2+)*2AsO4(3-)*99H2O=Sr(VOAsO4)2*99H2O

Conditions

Conditions	Yield
In water molar ratio V2O5:V:H3AsO4:metal acetate:water=1:0.5:5:2:833, Teflon-lined bomb, 200°C, 2 d; collection (filtration), washing (water, Me2CO);	70%

...Expand

: (acetic acid-κO) {6,6′-diethoxy-2,2′-[1,2-ethylenedioxybis(nitrilomethylidyne)]diphenolato-κ4O,N,N′,O′}zinc(II)

: 543-94-2
strontium(II) acetate

: bis{μ-6,6′-diethoxy-2,2′-[1,2-ethylenedioxybis(nitrilomethylidyne)]diphenolato}bis[μ-acetatozinc(II)]strontium(II)

Conditions

Conditions	Yield
In methanol; water at 20℃; for 0.166667h;	68%

: C34H36N4O10

: 543-94-2
strontium(II) acetate

: 5970-45-6
zinc(II) acetate dihydrate

: C38H38N4O14SrZn2

Conditions

Conditions	Yield
In ethanol; chloroform	60.8%

...Expand

: 35638-41-6
tetra-n-butylammonium permanganate

: 638-38-0, 993-02-2, 2180-18-9, 15411-95-7, 22981-23-3, 27004-39-3
manganese(II) acetate

: 543-94-2
strontium(II) acetate

: 75-98-9
Trimethylacetic acid

: C45H84Mn3O22Sr

Conditions

Conditions	Yield
In acetonitrile at 80℃; for 0.416667h;	60%

...Expand

: 790-83-0
4,4'-methylenedibenzoic acid

: 543-94-2
strontium(II) acetate

: [Sr(diphenylmethane-4,4’-dicarboxylate)(H2O)]

Conditions

Conditions	Yield
Stage #1: 4,4'-methylenedibenzoic acid; strontium(II) acetate In water at 20℃; for 0.0833333h; Stage #2: With propylamine for 0.0833333h; Stage #3: In N,N-dimethyl-formamide at 170℃; for 12h; Autoclave;	45%

: 67-56-1
methanol

: 75-09-2
dichloromethane

: C32H32N4O10

: 543-94-2
strontium(II) acetate

: 6018-89-9
nickel(II) acetate tetrahydrate

: C38H42N4Ni2O16Sr*2CH4O*2CH2Cl2

Conditions

Conditions	Yield
In water	44.65%

...Expand

: 546-68-9
titanium(IV) isopropylate

: 79-41-4
poly(methacrylic acid)

: 543-94-2
strontium(II) acetate

: 2Sr(2+)*8Ti(4+)*8O(2-)*1.73C3H7O(1-)*2.27C2H3O2(1-)*16C4H5O2(1-)

Conditions

Conditions	Yield
for 72h; Inert atmosphere; Schlenk technique;	40%

...Expand

: C32H32N4O10

: 543-94-2
strontium(II) acetate

: 6147-53-1
cobalt(II) diacetate tetrahydrate

: C36H34Co2N4O14Sr

Conditions

Conditions	Yield
In methanol; water at 20℃;	38.69%

...Expand

: 67-66-3
chloroform

: C32H32N4O10

: 543-94-2
strontium(II) acetate

: 5970-45-6
zinc(II) acetate dihydrate

: [Zn2(L)Sr(OAc)2]

Conditions

Conditions	Yield
In methanol; water	34.3%

...Expand

: 110-86-1
pyridine

: 35638-41-6
tetra-n-butylammonium permanganate

: 638-38-0, 993-02-2, 2180-18-9, 15411-95-7, 22981-23-3, 27004-39-3
manganese(II) acetate

: 543-94-2
strontium(II) acetate

: 75-98-9
Trimethylacetic acid

: C60H107Mn4NO26Sr

Conditions

Conditions	Yield
Stage #1: tetra-n-butylammonium permanganate; manganese(II) acetate; strontium(II) acetate; Trimethylacetic acid In water at 80℃; for 0.416667h; Stage #2: pyridine In ethyl acetate	12%

...Expand

: 7719-09-7
thionyl chloride

: 543-94-2
strontium(II) acetate

: 108-24-7
acetic anhydride

: 543-94-2
strontium(II) acetate

: 7782-50-5
chlorine

sulfur: sulfur

: 108-24-7
acetic anhydride

...Expand

: 392-56-3
Hexafluorobenzene

: 543-94-2
strontium(II) acetate

: strontium fluoride

Conditions

Conditions	Yield
With 2-Ethylhexanoic acid In xylene stoich., metal compd. dissolved in acid, mixed with soln. of halide compd. (xylene), combusted in methane/oxigen flame; XRD;

: 546-68-9
titanium(IV) isopropylate

: 563-63-3
silver(I) acetate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

Ba0.5Sr0.5TiO3#dotAg: Ba0.5Sr0.5TiO3#dotAg

Conditions

Conditions	Yield
With ethylene glycol; acetic acid In neat (no solvent) reactants disolved in acetic acid at 90 °C, ethylene glycol added, stirred for 60 min, aged at room temp. for 12 - 24 h, filtered, spin coated, dried at 200 °C for 10 min, pyrolyzed at 500 °C for30 min, coating repeated 11 times; powder XRD;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: barium strontium titanate

Conditions

Conditions	Yield
In acetic acid sol-gel technique; acetic acid boiled to 120°C; appropriate amt. of Ba(OAc)2 and Sr(OAc)2 dissolved at 90°C; stirred for 20 min; Ti compd. and some di-ethanol added; stirred for 20 min; dried; solidified by illumination with IR lamp for 2 d; heated to 165°C for 1 h; ground; sintered at 1000°C for 150 min in Al2O3 boat; detd. by X-ray powder diffraction;
In ethylene glycol; acetic acid (N2) dissolution of acetates in AcOH, addn. of Ti(OiPr)4 and ethylene glycol, heating, spin-coating, drying and heating (500-700°C) repeated three times;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: barium strontium titanate

Conditions

Conditions	Yield
In acetic acid sol-gel technique; acetic acid boiled to 120°C; appropriate amt. of Ba(OAc)2 and Sr(OAc)2 dissolved at 90°C; stirred for 20 min; Ti compd. and some di-ethanol added; stirred for 20 min; dried; solidified by illumination with IR lamp for 2 d; heated to 165°C for 1 h; ground; sintered at 1000°C for 150 min in Al2O3 boat; detd. by X-ray powder diffraction;
In ethylene glycol; acetic acid (N2) dissolution of acetates in AcOH, addn. of Ti(OiPr)4 and ethylene glycol, heating, spin-coating, drying and heating (500-700°C) repeated three times;
With 2-methoxy-ethanol; acetyl acetone In acetic acid Ba-compd. and Sr-compd. dissolved in glacial CH3COOH in molar ratio 9:1, heated up to 110°C, acetate and isopropoxide soln. with acetyl acetone mixed with stirring, 2-methoxy ethanol added, refluxed for 2 h, calcined at 1150°C for 6 h;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: Ba0.65Sr0.35TiO3

Conditions

Conditions	Yield
In ethylene glycol; acetic acid (N2) dissolution of acetates in AcOH, addn. of Ti(OiPr)4 and ethylene glycol, heating, spin-coating, drying and heating (500-700°C) repeated three times;
With lactic acid In 2-methoxy-ethanol; acetic acid sol/gel; Ti isopropoxide in methoxyethanol mixed with soln. of acetates in glacial acetic acid, stoich. mixt. contg. lactic acid (stabilizer) heated at 80°C to dryness for 72 h, xerogel calcined at 700°C for 1 h;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: barium strontium titanate

Conditions

Conditions	Yield
In acetic acid sol-gel technique; acetic acid boiled to 120°C; appropriate amt. of Ba(OAc)2 and Sr(OAc)2 dissolved at 90°C; stirred for 20 min; Ti compd. and some di-ethanol added; stirred for 20 min; dried; solidified by illumination with IR lamp for 2 d; heated to 165°C for 1 h; ground; sintered at 1000°C for 150 min in Al2O3 boat; detd. by X-ray powder diffraction;
With 2-Ethylhexanoic acid; 2,2'-iminobis[ethanol] In neat (no solvent) acetates refluxed with 2-ethylhexanoic acid, distilled, dissolved in iso-propyl alcohol containing Ti tetraisopropoxide in presence of diethylamine, stirred for 30 min, dip-coated, dried at 110 °C for 0.5 h, heated at 550-600 °C for 0.5 h; powder XRD;
In neat (no solvent) dissolved in acetic acid - ethyleneglycol monoethylether mixture, spin coated, dried at 423 K for 3 min, annealed at 923 or 1073 for 20 min; XRD;
In acetic acid Ba(O2CCH3)2 and Sr(O2CCH3)2 dissolved in dehydrated acetic acid at 90 °C, stirred for 20 mins, Ti=(OCH(CH3)2)4 and di-ethanol added, stirred for 20 mins, dried and solidified illuminating with 400 W infrared lamp for 2 ds, heated to 165 °C; ground, sintered at 1000 °C for 150 mins, pressed into pellets ,sintered at 1350 °C;
In ethylene glycol; acetic acid (N2) dissolution of acetates in AcOH, addn. of Ti(OiPr)4 and ethylene glycol, heating, spin-coating, drying and heating (500-700°C) repeated three times;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: barium strontium titanate

Conditions

Conditions	Yield
With ethylene glycol; acetic acid In neat (no solvent) reactants disolved in acetic acid at 90 °C, ethylene glycol added, stirred for 60 min, aged at room temp. for 12 - 24 h, filtered, spin coated, dried at 200 °C for 10 min, pyrolyzed at 500 °C for30 min, coating repeated 11 times; powder XRD;
In acetic acid sol-gel technique; acetic acid boiled to 120°C; appropriate amt. of Ba(OAc)2 and Sr(OAc)2 dissolved at 90°C; stirred for 20 min; Ti compd. and some di-ethanol added; stirred for 20 min; dried; solidified by illumination with IR lamp for 2 d; heated to 165°C for 1 h; ground; sintered at 1000°C for 150 min in Al2O3 boat; detd. by X-ray powder diffraction;
In ethylene glycol; acetic acid dissolving Ba(OAc)2, Sr(OAc)2, and Ti(i-OPr)4 in acetic acid/ethylene glycol (3:1), stirring at 90°C for 60 min; spin-coated onto Pt/Ti/SiO2/Si substrate with annealing;
In acetic acid Ba(O2CCH3)2 and Sr(O2CCH3)2 dissolved in dehydrated acetic acid at 90 °C, stirred for 20 mins, Ti=(OCH(CH3)2)4 and di-ethanol added, stirred for 20 mins, dried and solidified illuminating with 400 W infrared lamp for 2 ds, heated to 165 °C; ground, sintered at 1000 °C for 150 mins, pressed into pellets ,sintered at 1350 °C;
With propylene glycol; 2-methoxyethanol; acetylacetone In water Ba and Sr salts dissolved in distd. water and propylene glycol added, Ticompd. prereacted with 2-methoxyethanol and acetylacetone, Ba/Sr stock soln. added to Ti stock soln., refluxed for 6 h, pyrolyzed at 400.degree .C for 30 min; annealed at 750°c for 30 min;

...Expand

: 546-68-9
titanium(IV) isopropylate

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: barium strontium titanate

Conditions

Conditions	Yield
In acetic acid sol-gel technique; acetic acid boiled to 120°C; appropriate amt. of Ba(OAc)2 and Sr(OAc)2 dissolved at 90°C; stirred for 20 min; Ti compd. and some di-ethanol added; stirred for 20 min; dried; solidified by illumination with IR lamp for 2 d; heated to 165°C for 1 h; ground; sintered at 1000°C for 150 min in Al2O3 boat; detd. by X-ray powder diffraction;
In ethylene glycol; acetic acid (N2) dissolution of acetates in AcOH, addn. of Ti(OiPr)4 and ethylene glycol, heating, spin-coating, drying and heating (500-700°C) repeated three times;

...Expand

: 543-94-2
strontium(II) acetate

: 543-80-6
barium(II) acetate

: titanium(IV) oxide

A: strontium titanate

B: barium titanate

Conditions

Conditions	Yield
With ethylenediaminetetraacetic acid; KOH In water High Pressure; hydrothermal synthesis at 50 °C;

...Expand

: 10361-46-3
bismuth subnitrate

: 543-94-2
strontium(II) acetate

: 150747-55-0
tantalum pentaethoxide

A: 1633-05-2
strontium(II) carbonate

B: 1304-76-3
bismuth(III) oxide

Conditions

Conditions	Yield
With catalyst: CH3COOH In further solvent(s) Sr(CH3COO)2, BiONO3, and Ta(OC2H5)5 in a mole ratio of 1:2:2 dissolved in 2-methoxyethanol at 80°C; pH adjusted to 3.5; transparent gel formed; dried at 100°C; calcined at 500°C for 1 h; XRD, TEM, IR;

...Expand

STRONTIUM ACETATE Chemical Properties

IUPAC Name: Strontium diacetate （543-94-2 ）
Molecular Structure:
Molecular Formula: C₄H₆O₄Sr
Molecular Weight: 205.71
CAS : 543-94-2
EINECS 208-854-8
Flash Point: 40 °C
Enthalpy of Vaporization: 23.7 kJ/mol
Boiling Point: 117.1 °C at 760 mmHg
Vapour Pressure: 13.9 mmHg at 25°C
Melting point: 150°C -0.5H₂O
Density 2,099 g/cm³
Sensitive: Hygroscopic
Merck : 14,8836
BRN : 3692534
Synonyms: Strontiumdiacetate ; Strontium acetate ; Strontium acetate ; Strontium acetate, 99.995% ; Strontiumacetatehydrate,puratronic,99.9965%(metalsbasis) ; Strontium acetate reagent ; Strontium acetate hydrate, puratronic(r), 99.9965% (metals basis) ; Diacetic acid strontium salt
Product Categories: Inorganic Chemicals;StrontiumMicro/Nanoelectronics;Solution Deposition Precursors;Inorganic Salts;Strontium;Synthetic Reagents;Q-S, Puriss p.a.Synthetic Reagents;Analytical Reagents for General Use;Puriss p.a.

STRONTIUM ACETATE Uses

1.Strontium acetate（543-94-2 ) is used as insect repellent in Medicine
2.Strontium acetate（543-94-2 ) is also used as a chemical reagent

STRONTIUM ACETATE Toxicity Data With Reference

Organism	Test Type	Route	Reported Dose (Normalized Dose)	Effect	Source
mouse	LDLo	intravenous	239mg/kg (239mg/kg)		Journal of Pharmacology and Experimental Therapeutics. Vol. 71, Pg. 1, 1941.
rat	LDLo	intravenous	123mg/kg (123mg/kg)		Journal of Pharmacology and Experimental Therapeutics. Vol. 71, Pg. 1, 1941.

STRONTIUM ACETATE Safety Profile

Safety Statements: 24/25
24/25: Avoid contact with skin and eyes
WGK Germany: 3
RTECS AJ4725000
F : 3-10
TSCA: Yes

STRONTIUM ACETATE Specification

1.Products of Combustion: These products are carbonoxides(CO,CO₂).Some metallic oxides.
2.FireHazards : In Presence of Various Substances: Slightly flammable to flammable in presence of heat.
Fire Fighting Media and Instructions:
Small fire:Use dry chemical powder.
3.Large fire:Use water spray,fogorfoam.Do not use water jet.
4.Special Remarkson Fire Hazards: As with most organic solids,fire is possible at elevated temperatures
5.Precautions:Keep Strontium acetate（543-94-2 ) away from heat.Keep away from sources of ignition.Ground all equipment containing material.Do not
breathe dust.Keep away from incompatibles such as oxidizing agents.
6.Storage: Keep container tightly closed.Keep container in a cool,well-ventilated area.

Product Name

STRONTIUM ACETATE

Synthetic route

STRONTIUM ACETATE Chemical Properties

STRONTIUM ACETATE Uses

STRONTIUM ACETATE Toxicity Data With Reference

STRONTIUM ACETATE Safety Profile

STRONTIUM ACETATE Specification

Related Products

Hot Products