1-boranyl-1,3,5-triaza-7-phosphaadamantane
water
A
boric acid
B
(1,3,5-triaza-7-phosphaadamantane)
Conditions | Yield |
---|---|
In water; acetone B-complex reacted with water in acetone/water (1:1) at 80°C for ca. 48 h; detn. by IR, 11B-NMR; | A 100% B n/a |
In acetone slow reaction of B-complex with water; acceleration at higher temp.; | A 100% B n/a |
1,3,5,7-Tetra-tert-butyl-2,4,6,8-tetrachloro-[1,3,5,7,2,4,6,8]tetrazatetraborocane
A
boric acid
B
tert-butylamine
Conditions | Yield |
---|---|
With water In further solvent(s) byproducts: HCl; solvent cyclohexanol, in tube 20.5 h at 160°C; | A n/a B 97% |
With H2O In further solvent(s) byproducts: HCl; solvent cyclohexanol, in tube 20.5 h at 160°C; | A n/a B 97% |
With water In xylene byproducts: HCl; in tube 20.5 h boiling; | A n/a B 62% |
With H2O In xylene byproducts: HCl; in tube 20.5 h boiling; | A n/a B 62% |
closo-1-sulfinic acid-1,12-dicarbadodecaborane(12)
dihydrogen peroxide
A
closo-1,12-(H)2-1,12-C2B10(OH)10
B
closo-2,3,4,5,6,7,8,9,10,11-decahydroxy-1-sulfonic acid-1,12-dicarbadodecaborane(12)
C
boric acid
Conditions | Yield |
---|---|
In water aq. 30% H2O2 added to B compd.; refluxed for 3.5 h; monitored by (11)B NMR spectra; cond. HBr added; stirred (room temp., 2 h); kept. (80°C, 8 h); Br2 removed by N2 steam; volatiles removed in vac.; triturated in MeOH; centrifuged; supernatant sepd.; repeated 5 times; residue dissolved in water; filtered; dried; | A 5% B 88% C 3% |
4-methoxyphenylboronic acid
B
boric acid
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: (c-C5H9)7Si7O9(OH)3; (Ar); std. Schlenk technique; B compd. was added to soln. of Pt complex in THF; heated at 60°C for 30 min; concd. (vac.); hexane added; cooled at -20°C; filtered; washed (H2O); dried (vac.); elem. anal.; | A 88% B n/a |
In benzene-d6 byproducts: (c-C5H9)7Si7O9(OH)3; (Ar); std. Schlenk technique; mixt. of B compd. and Pt complex in C6D6 was heated at 60°C for 30 min; NMR monitoring; | |
In tetrahydrofuran-d8 byproducts: (c-C5H9)7Si7O9(OH)3; (Ar); std. Schlenk technique; mixt. of B compd. and Pt complex in THF-d8was heated at 60°C for 15 min; NMR monitoring; |
diphenyl diselenide
2,4,5-triphenyl-1,3-dioxoborole
A
boric acid
B
9,10-phenanthrenequinone
Conditions | Yield |
---|---|
In benzene Irradiation (UV/VIS); irrdn. for 2 h 40 min with a 450 W medium pressure mercury lamp (290 to 330 nm), under Ar; extn. (aq. NaOH), dried (Na2SO4), evapd., crystn. from hexane, yields 9,10-phenanthraquinone; | A n/a B 84% |
2,4,6-trifluorophenylboronic acid
Pt(C6H2F3-2,4,6)(Ph)(1,5-cyclooctadiene)
B
boric acid
Conditions | Yield |
---|---|
In water; toluene room temp., 1 h, toluene/H2O = 100/1; | A 83% B n/a |
In toluene under inert atm. to suspn. Pt complex in toluene water and (C6H2F3-2,4,6)B(OH)2 were added and stirred at room temp. for 1 h; solvent was evapd., residue was extd. by CDCl3; product was identified by NMR; | A 83% B n/a |
Conditions | Yield |
---|---|
With hydrogenchloride; formaldehyd In dichloromethane; water byproducts: H2, CH3OH; addn. of CH2Cl2, aq. soln. of CH2O and aq. HCl to suspn. of B-compd. in H2O, stirring (ambient temp., 20 min); sepn. of CH2Cl2 layer, drying (CaCl2), evapn. to dryness, sublimation (25°C, 1.3 Pa, cold surface at -70°C); | A 81% B n/a |
cyanoborane
water
A
hydrogen cyanide
B
hydrogen
C
boric acid
Conditions | Yield |
---|---|
hydrolysis at 90-95°C; | A 60% B 80% C 60% |
tris(triphenylsiloxy)borane
boric acid
Conditions | Yield |
---|---|
With acetic acid In benzene byproducts: triphenylacetoxysilane; reflux for 3h, molar ratio B-compd.:AcOH=1:3; H3BO3 pptd., elem. anal.; | 78% |
[Pt((c-C5H9)7Si7O10(OH)2)(C6H5)(2,2'-bipyridine)]
4-methoxyphenylboronic acid
B
boric acid
Conditions | Yield |
---|---|
In tetrahydrofuran byproducts: (c-C5H9)7Si7O9(OH)3; (Ar); std. Schlenk technique; B compd. was added to soln. of Pt complex in THF; heated at 60°C for 4 h; concd. (vac.); hexane added; cooled at -20°C; filtered; washed (H2O); dried (vac.); elem. anal.; | A 75% B n/a |
o-carboranylacetic acid
2-aminoethyl β-D-galactopyranosyl-(1->4)-O-β-D-glucopyranoside
C
boric acid
Conditions | Yield |
---|---|
With 4-(4,6-dimethoxy[1.3.5]triazin-2-yl)-4-methylmorph In methanol; water under Ar atm. to soln. carbohydrate amine and o-carboranylacetic acid inaq. MeOH 4-(4,6-dimethoxy(1.3.5)triazin-2-yl)4-methylmorpholinium chlor ide was added and stirred at room temp. for 22 h; volatiles were removed in vacuo, residue was dissolved in H2O, reverse-phase chromy. (SepPak C18, H2O -> MeOH); | A 7.6% B 74.2% C n/a |
Trimethyl borate
cyclotriboric acid trimethyl ester
A
methanol
B
boric acid
Conditions | Yield |
---|---|
With water | A 72.5% B n/a |
Conditions | Yield |
---|---|
In ethanol; water stirred in air for 12 h; EtOH removed in vac., extd. (hexane), filtered on SiO2, evapd., productyield dependence on H2O concn. in EtOH (40-60%); | A 48% B 68% |
phenylboronic acid
B
boric acid
Conditions | Yield |
---|---|
In water; toluene room temp., 1 h, toluene/H2O = 100/1; | A 66% B n/a |
In toluene under inert atm. to suspn. Pt complex in toluene water and PhB(OH)2 wereadded and stirred at room temp. for 1 h; solvent was evapd., residue was extd. by CDCl3; product was identified by NMR; | A 66% B n/a |
In toluene room temp., 1 h; | A 38% B n/a |
4-methoxyphenylboronic acid
(1,5-cyclooctadiene)Pt(C6H4-4-OMe)(C6H5)
C
boric acid
Conditions | Yield |
---|---|
In toluene room temp., 1 h; | A 64% B 14% C n/a |
phenyl(m-carboran-9-yl)chloronium tetrafluoroborate
A
9-chloro-m-carborane
B
9-hydroxy-1,7-dicarba-closo-dodecaborane
C
boric acid
Conditions | Yield |
---|---|
With water In water stirred for 200 h, 20-40°C; extracted with benzene, evaporated to dryness, chromatographed on silica (1. benzene-hexane (1:1), 2. ether), IR; | A 8% B 56% C 33% |
Conditions | Yield |
---|---|
In water under N2 or Ar; by a react. of B-contg. compd. with H2O; evapn. of water at 80°C under vac.; | 52% |
Conditions | Yield |
---|---|
With H2; N2 In neat (no solvent) Electric Arc; pulse heating (plasma, puls repitition rate 5-12,5 Hz, N2 flow 0.2 - 1.65 l/min, H2 flow 1.13 - 3.5 l/min9; further products; X-ray diffraction; | A n/a B n/a C 50% D n/a E n/a |
1,6-dicarba-closo-decaborane(10)
boric acid
Conditions | Yield |
---|---|
With HCl In tetrahydrofuran 25°C, 10 h, acidic hydrolysis; | 50% |
sodium tetrahydroborate
trifluoroborane diethyl ether
A
sodium tetrafluoroborate
B
nido-decaborane
C
diethyl ether
D
boric acid
Conditions | Yield |
---|---|
With potassium permanganate; sulfuric acid In water; diethylene glycol; benzene byproducts: H2; NaBH4 in diglyme heated to 105°C and BF3*OEt2 added for 6 h and stirred for 1 h, mixt. cooled under N2 atm., water added, diglyme removed, H2SO4, benzene and KMnO4 added and react. mixt. stirred at 10°C; mixt. filtered, layers separated, benzene layer washed with water and dried over anhyd. MgSO4, evapd. and sublimed; | A n/a B 47% C n/a D n/a |
With sulfuric acid; dihydrogen peroxide; iron(II) sulfate In hexane; water; diethylene glycol byproducts: H2; NaBH4 in diglyme heated to 105°C and BF3*OEt2 added for 6 h and stirred for 1 h, mixt. cooled under N2 atm., water added, diglyme removed, H2SO4, hexane and FeSO4, then H2O2 added and react. mixt. stirred at 35°C; mixt. filtered, layers separated, hexane layer washed with water and dried over anhyd. MgSO4; | A n/a B 44% C n/a D n/a |
With sulfuric acid; dihydrogen peroxide In water; diethylene glycol; benzene byproducts: H2; NaBH4 in diglyme heated to 105°C and BF3*OEt2 added for 6 h and stirred for 1 h, mixt. cooled under N2 atm., water added, diglyme removed, H2SO4, benzene and then H2O2 added and react. mixt. stirred for 68 h; mixt. filtered, layers separated, benzene layer washed with water and dried over anhyd. MgSO4; | A n/a B 41.1% C n/a D n/a |
closo-1,12-bis(sulfonic acid)-1,12-dicarbadodecaborane(12)
dihydrogen peroxide
A
closo-2,3,4,5,6,7,8,9,10,11-decahydroxy-1-sulfonic acid-1,12-dicarbadodecaborane(12)
C
boric acid
Conditions | Yield |
---|---|
In water excess of aq. 30% H2O2 added to B compd.; refluxed for 5 h; monitored by(11)B NMR spectra; concd. HBr added; stirred for 2 h at room temp.; kep t at 80°C for 8 h; Br2 removed by N2 steam; volatiles removed in vac.; triturated in MeOH; centrifuged; supernatant sepd.; repeated 5 times; residue dissolved in water; filtered; dried (mono-sulfonic acid compd.); MeOH washings evapd. slowly (bis-sulfonic acid compd.); | A 15% B 45% C n/a |
2-phenoxy-4-methyl-1,3,2-dioxaborinane
benzoyl chloride
A
hydrogenchloride
B
benzoic acid phenyl ester
C
boric acid
Conditions | Yield |
---|---|
In benzene byproducts: 1,3-butanediol; acylchlorid dropwise addn. to soln. of B-compd., boiling (40 min), 1 d at room temperature, aq. HCl addn.; | A n/a B 43% C n/a |
dimethylsulfide
[closo-1-CB9H9-1-N2]
A
(CH3)2SCB9H9
B
boric acid
Conditions | Yield |
---|---|
A 40% B n/a |
2,4,6-trifluorophenylboronic acid
Pt(C6H2F3-2,4,6)(Ph)(1,5-cyclooctadiene)
Pt(C6H2F3-2,4,6)2(cod)
C
boric acid
Conditions | Yield |
---|---|
In toluene room temp., 1 h; | A 36% B 1% C n/a |
closo-1,12-bis(sulfinic acid)-1,12-dicarbadodecaborane(12)
dihydrogen peroxide
A
closo-2,3,4,5,6,7,8,9,10,11-decahydroxy-1-sulfonic acid-1,12-dicarbadodecaborane(12)
C
boric acid
Conditions | Yield |
---|---|
In water excess of aq. 30% H2O2 added to B compd.; refluxed for 5 h; monitored by(11)B NMR spectra; concd. HBr added; stirred for 2 h at room temp.; kep t at 80°C for 8 h; Br2 removed by N2 steam; volatiles removed in vac.; triturated in MeOH; centrifuged; supernatant sepd.; repeated 5 times; residue dissolved in water; filtered; dried (mono-sulfonic acid compd.); MeOH washings evapd. slowly (bis-sulfonic acid compd.); | A 25% B 35% C n/a |
2-(1-adamantyl)-1,3,2-dioxaborinane
boric acid
Conditions | Yield |
---|---|
With water In neat (no solvent) (N2), boiled with reflux condenser for 30 min; extd. (ether); | 29% |
With hydrogenchloride; water In diethyl ether Kinetics; byproducts: adamantane, adamantanol; (N2), C10H15B02C3H6 hydrolysed by 5% HCl (stirred at 20°C for several days); GLC; | |
With water In diethyl ether Kinetics; byproducts: adamantane, adamantanol; (N2), soln. of C10H15B02C3H6 added to water and stirred at 20°C for several days; aq. layer removed, washed (ether); GLC; |
bis-9-M-carboranylbromonium borofluoride
boric acid
Conditions | Yield |
---|---|
With water soln. of bis(9-m-carboranyl)bromonium borofluoride in water boiled for 4h; diluted with acetone, extn. with CH2Cl2, distn. in vac., addn. of etherpptn. of unreacted carborane, evapn. of aq. ext. left boric acid; | 25% |
Conditions | Yield |
---|---|
With steam In neat (no solvent) heating of a mixt. of RbCl and boric acid in a stream of water-vapour at 100-150°C;; | 100% |
With steam In neat (no solvent) heating of a mixt. of RbCl and boric acid in a stream of water-vapour at 100-150°C;; | 100% |
With water byproducts: HCl; 100-150°C with steam; | |
With H2O byproducts: HCl; 100-150°C with steam; |
Conditions | Yield |
---|---|
In toluene boiling a mixt. of D-mannitol, H3BO3, and n-propanol in toluene on a Dean-Stark apparatus (azeotropic removal of H2O);; removal of toluene and propanol; elem. anal.;; | 100% |
salicylic alcohol
boric acid
triphenylhydroxysilane
2-triphenylsiloxy-4H-1,3,2-benzodioxaborin
Conditions | Yield |
---|---|
In benzene byproducts: H2O; azeotropic removal of water; elem. anal.; | 100% |
boric acid
benzene-1,2-diol
triphenylhydroxysilane
2-triphenylsiloxy-1,3,2-benzodioxaborole
Conditions | Yield |
---|---|
In benzene byproducts: H2O; azeotropic removal of water; elem. anal.; | 100% |
boric acid
ethylene glycol
triphenylhydroxysilane
2-triphenylsiloxy-1,3,2-dioxaborolane
Conditions | Yield |
---|---|
In benzene byproducts: H2O; azeotropic removal of water; distd. in vac., elem. anal.; | 100% |
Conditions | Yield |
---|---|
With lead(II) fluoride In neat (no solvent, solid phase) at 450 - 800℃; for 48h; | 100% |
Conditions | Yield |
---|---|
In toluene Dean-Stark; Reflux; | 100% |
Conditions | Yield |
---|---|
at 750℃; for 72h; | 100% |
Conditions | Yield |
---|---|
at 750℃; for 72h; | 100% |
Conditions | Yield |
---|---|
at 750℃; for 72h; | 100% |
cadmium(II) carbonate
boric acid
Conditions | Yield |
---|---|
at 950℃; for 120h; | 100% |
Conditions | Yield |
---|---|
for 0.166667h; Heating; | 100% |
2,5-Bis(2-hydroxypropylthio)-1,3,4-thiadiazole
N,N-diethanolstearylamine
boric acid
Conditions | Yield |
---|---|
for 8h; | 100% |
Conditions | Yield |
---|---|
In chloroform for 66h; Reflux; | 100% |
Conditions | Yield |
---|---|
at 119.84℃; for 24h; Sealed tube; | 100% |
Conditions | Yield |
---|---|
Stage #1: butanoic acid anhydride; boric acid at 90 - 120℃; for 3h; Inert atmosphere; Stage #2: C14H11F2NO4 at 115℃; for 2h; | 100% |
Conditions | Yield |
---|---|
Stage #1: rubidium carbonate; neodymium(III) oxide; boric acid; germanium dioxide at 1050℃; for 48h; Stage #2: at 950℃; | 100% |
Conditions | Yield |
---|---|
at 300℃; for 3h; | 100% |
strontium(II) carbonate
sulfuric acid
sulfur trioxide
boric acid
Conditions | Yield |
---|---|
at 180℃; for 24h; | 100% |
Conditions | Yield |
---|---|
In N,N-dimethyl-formamide at 10℃; under 750.075 Torr; for 12h; Flow reactor; | 99.1% |
Conditions | Yield |
---|---|
In water at 20℃; under 0 Torr; for 8h; Flow reactor; | 99.1% |
Conditions | Yield |
---|---|
byproducts: H2O; B(OH)3 excess; 160°C; | 99% |
byproducts: H2O; B(OH)3 excess; 160°C; | 99% |
boric acid
ethylenediamine
Conditions | Yield |
---|---|
In melt heating at 180°C for 3 days; | 99% |
Conditions | Yield |
---|---|
With multi-walled carbon nanotubes In solid byproducts: CO, H2, H2O; mixt. of multi-walled carbon nanotubes and H3BO3 taken in quartz tube, NH3 gas passed through with 10 sccm flow rate at 200 °C 2 h, temp.slowly raised to 1000 °C for 3 h; | 99% |
With pyrographite; iron In neat (no solvent) byproducts: CO, H2, H2O; mixt. of activated carbon, H3BO3 and ferric nitrate (mole ratio of 3:1:0.1) taken in quartz tube, dried in oven at 60 °C 6 h, NH3 gas passed through with 10 sccm flow rate, heating at 1300 °C for 4 h; | |
byproducts: H2O; synthesis of BN coating on the surfaces of carbon nanotubes and nanofibers around 1150°C using infiltration of nanotubes with boric acid and nitridation in ammonia; |
Conditions | Yield |
---|---|
In acetone mixt. of alkaloid, boric acid and 2,3-dihydroxynaphthalene (molar ratio 1:1:2) dissolved in hot acetone, warmed; evapd., noncryst. solid product; | 99% |
phosphoric acid
boric acid
Conditions | Yield |
---|---|
In water hydrothermal synthesis (180°C, 5 d); elem. anal.; | 99% |
Conditions | Yield |
---|---|
In water malic acid dissolved in H2O, treated with boric acid, aq. NaOH added, stirred in open flask at 100 °C for ca. 4 h; mixt. evapd.; detd. by NMR, XRD; | 99% |
Conditions | Yield |
---|---|
In toluene byproducts: H2O; (N2); stirring of mixt. of boric acid and 6-methyl-5-hepten-3-yn-1-ol intoluene under reflux for 12 h with removal of water by a Dean-Stark tra p; evapn. of solvent by distn. (180-230°C/0.5 mmHg); | 99% |
Conditions | Yield |
---|---|
In toluene phenol (excess) and acid heated for 2 h (Dean-Stark trape), volatiles removed (vac.), dissolved (THF), added dropwise to a soln. of Na compd. (THF), stirred for 1-12 h; ppt. filtered, washed (diethyl ether, pentane), dried (high vac.); elem.anal.; | 99% |
The Boric acid, with the CAS registry number 11113-50-1, is also known as UNII-R57ZHV85D4 .It belongs to the product categories of UVCBs-inorganic.Its EINECS number is 234-343-4.This chemical's molecular formula is H3BO3 and molecular weight is 61.83. What's more,Its systematic name is Boric acid.
The Boric acid has many various application, such as in personal care products, food additives, biological insecticides & antiputrefactiva. Except these, it is also used in the glass, ceramics, rubber, fertilisers, flame retardants, paints, industrial fluids, brake fluids, soldering products, film developers and so on.And it is among one kind of 8 Substances of Very High Concern which is issued by the ECHA, as this chemical could cause very serious danger to people's health, including being carcinogenic, inducing the organism's mutation, damage to genital system and so on.
Physical properties about Boric acid are:(1)ACD/LogP: -0.61; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): -0.61; (4)ACD/LogD (pH 7.4): -0.62; (5)ACD/BCF (pH 5.5): 1.00; (6)ACD/BCF (pH 7.4): 1.00; (7)#H bond acceptors: 3; (8)#H bond donors: 3; (9)#Freely Rotating Bonds: 3; (10)Index of Refraction: 1.385; (11)Molar Refractivity: 10.083 cm3; (12)Molar Volume: 43.003 cm3; (13)Surface Tension: 59.1980018615723 dyne/cm; (14)Density: 1.438 g/cm3.
You can still convert the following datas into molecular structure:
(1)SMILES:B(O)(O)O;
(2)Std. InChI:InChI=1S/BH3O3/c2-1(3)4/h2-4H;
(3)Std. InChIKey:KGBXLFKZBHKPEV-UHFFFAOYSA-N.
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View