PurposeThe objective of this study was to evaluate the effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin with and without aging protocols.

A novel grouting material based on magnesium phosphate cement (MPC) was prepared by two-component grouting method with additions of fly ash (FA) and ground granulated blast furnace slag (GGBS). The main concern of this research is to study the influences of the addition of GGBS on the properties...

Triallyl phosphite (TAPi) was used as an electrolyte additive to improve performance of LiNi0.6Co0.2Mn0.2O2/graphite pouch cells at elevated temperature. The high temperature storage and cycling performances of pouch cells were investigated by various electrochemical methods and microscopy techn...

Polymers of triallyl phosphate (TAP) with allyl diglycol carbonate (ADC), pentaerythritol tetrakis allyl carbonate (PETAC) and N-allyloxycarbonyldiethanolaminebis (allyl carbonate) (NADAC) monomers have been prepared and copolymerized with ADC to get poly (ADC-co-TAP), poly (TAP-co-PETAC) and po...

The role of triallyl phosphate as an electrolyte additive in Li(Ni0.42Mn0.42Co0.16)O2/graphite pouch cells was studied using ex-situ gas measurements, ultra high precision coulometry, automated storage experiments, electrochemical impedance spectroscopy, long-term cycling and X-ray photoelectron...

The solubilities of ammonium dihydrogen phosphate (MAP) were determined by dynamic method in the systems of (NH4)2SO4 + water and NH4F + water at the temperatures of 293.2–343.2 K at an atmospheric pressure, and the experimental data was fitted by the modified Apelblat equation. The result show...

The pyrolysis behaviors of Shengli lignite (SL) pretreated with ionic liquid 1-butyl-3-methyl-imidazolium dihydrogen phosphate ([Bmim]H2PO4) was studied in this paper. The effect of pretreatment temperature and the ratio of [Bmim]H2PO4 to SL on the pyrolysis behaviors of lignite were mainly inve...

The production of ionic liquids involves a metathesis step in which the desired anion and cation are combined. Depending on the desired product purity, this step can be accomplished by different methods, including acid base neutralisation reactions, the use of silver salts and electrodialysis. I...

A series of novel silicon-containing epoxy/PEPA phosphate flame retardants (EPPSi) were synthesized by polyphosphoric acid (PPA), caged bicyclic phosphate 1-oxo-4-hydroxymethyl-2,6,7-trioxa-l-phosphabicyclo [2.2.2] octane (PEPA), and different ratios of silicon-containing epoxy 1,1,3,3-tetrameth...

Hydrophobic polyhedral oligomeric silsesquioxane (POSS) molecules were utilized for the surface coating to improve the hydrophobicity of the surface of phosphate glass (Pglass). To maximize the Pglass surface hydrophobicity, protrusions on the Pglass surface were successfully prepared by Pglass ...

This study was designed to investigate the effect of inorganic phosphate supplementation on invasive behavior of Pseudomonas aeruginosa in burn wound infections. An emulsion-based lotion containing sodium dihydrogen phosphate was formulated and then 50 female Sprague-Dawley rats with burn wounds...

A series of novel calix[4]arene hydrazone and semicarbazone based neutral receptors have been synthesized and characterized by IR, UV–vis, and NMR spectroscopies. The preliminary UV–vis and 1H NMR titration experiments revealed that 25,26,27,28-tetrapropoxycalix[4]arene tetra-semicarbazone can...

In the present work, a comprehensive study on the application of TiO2 photocatalysis for the removal of the flame retardant tris (1-chloro-2-propyl) phosphate (TCPP) from both ultrapure water (UW) and real wastewater (WW) is presented. All the photocatalytic experiments were conducted using envi...

Removing low-concentration nitrate and phosphate from water is desirable because they may cause eutrophication when discharged, but it is challenging using current technologies. Although ultrafiltration (UF) membranes have higher permeability than nanofiltration and reverse osmosis membranes, th...

In the present study, we investigated the trapping of methylglyoxal (MGO) by propyl gallate (PG), a known food grade antioxidant, and the anti-carbonyl and anti-oxidative properties of the mono-MGO adduct of PG (MM-PG). Our result indicated that more than 77.5% MGO was suppressed by PG after a 3...

A novel phosphate surface-imprinted polymer (GO-IIP) with high performance has been prepared by developing a La(III)-coordinated 3-methacryloxyethyl-propyl (MPS) bi-functionalized graphene oxide (GO). La(III) modified graphene oxide (GO-La) was used as functional monomer and methyl methacrylate ...

We report herein the first successful grafting of perfluorinated vinyl ether monomer into base polymer films by simultaneous radiation method. 2-Bromotetrafluoroethyl trifluorovinyl ether (BrTFF) could be grafted into poly(ethylene-co-tetrafluoroethylene) (ETFE) films by γ-rays irradiation at r...

The polymerization of trifluorovinyl heptafluoropropyl ether (CF2CF–O–C3F7) (FVPE) was investigated by γ-rays irradiation to afford high-molecular weight polymer of FVPE.

BackgroundClonazepam is considered to be a first-line treatment for rapid eye movement sleep-related behavior disorder (RBD) in Parkinson's disease (PD). The purpose of this study was to determine the short-term efficacy and safety of clonazepam for the treatment of probable RBD (pRBD) in p...

A new family of benzimdazolin-2-iminato actinide−(IV) complexes [(Bim7-MeDipp/MeN)An(N(SiMe3)2)3] (An = U (3), Th (4)) and [(Bim4-MeDipp/MeN)An(N(SiMe3)2)3] (An = U (5), Th (6)) were synthesized and their solid state structures were established by single-crystal X-ray diffraction analysis. The c...