Conditions | Yield |
---|---|
In tetrachloromethane Kinetics; Irradiation (UV/VIS); Kinetics of the reaction of Co(C2H5)(H3CCNOHONCCH3)2(C5H5N) with I2 under irradiation with light at 517 nm is investigated.; MeI and CoI(H3CCNOHONCCH3)2(C5H5N) are the products.; | A n/a B 100% |
ethyl iodide
Conditions | Yield |
---|---|
With iodine In acetonitrile Kinetics; byproducts: {Co(bis(dimethylglyoximato))py(I)}; one-electron oxidn. of Co complex by I2 at 298 K; monitored by (1)H-NMR and UV spect. (361 nm); | 100% |
Conditions | Yield |
---|---|
at 90 - 170℃; for 0.166667h; Arbuzov Reaction; | A n/a B 98% C n/a |
triethyl phosphite
methyl iodide
A
Diethyl methylphosphonate
B
ethyl iodide
Conditions | Yield |
---|---|
at 130℃; for 0.0833333h; Michaelis-Arbuzov reaction; microwave irradiation; | A 97% B n/a |
Conditions | Yield |
---|---|
With iodine In acetonitrile Kinetics; byproducts: I3(1-), {(C2H5)Co(2,2'-bipyridine)2I}(1+); one-electron oxidn. of cis-Co complex by I2 at 298 K; monitored by (1)H-NMR and UV spect. (361 nm); | A <1 B <1 C 97% D 3.2% |
methoxyethene
propargyl alcohol
A
3-(1-methoxy-ethoxy)-propyne
B
ethyl iodide
Conditions | Yield |
---|---|
With toluene-4-sulfonic acid | A 96% B n/a |
iodobenzene
triethyl phosphite
A
diethyl phenylphosphonate
B
ethyl iodide
Conditions | Yield |
---|---|
tetrakis(triethylphosphite)nickel(0) at 160℃; | A 94% B n/a |
at 160℃; Mechanism; var. catalysts, var. temp.; |
diethyl phosphoriodidite
N-(propylidene)-tert-butylamine
A
ethyl iodide
Conditions | Yield |
---|---|
In diethyl ether for 2h; Ambient temperature; | A n/a B 92% |
trimethylsilyl iodide
ethyl acetate
A
trimethylsilyl acetate
B
ethyl iodide
Conditions | Yield |
---|---|
at 100℃; for 0.5h; Mechanism; Product distribution; | A n/a B 92% |
4-vinylbenzyl iodide
triethyl phosphite
A
[(4-ethenylphenyl)methyl]phosphonic acid diethyl ester
B
ethyl iodide
Conditions | Yield |
---|---|
at 20℃; for 6h; | A 91% B n/a |
O,O-diethyl-N-butyl-N-isobutenyl aminophosphite
A
ethyl iodide
Conditions | Yield |
---|---|
With methyl iodide at 20℃; | A 90.5% B 87.1% |
O,O-diethyl-N-butyl-N-isobutenyl aminophosphite
methyl iodide
A
ethyl iodide
Conditions | Yield |
---|---|
at 20℃; | A 90.5% B 87.1% |
Conditions | Yield |
---|---|
In diethyl ether for 2h; Ambient temperature; | A n/a B 90% |
Conditions | Yield |
---|---|
In tetrachloromethane Kinetics; byproducts: C4H10, C2H6; Irradiation (UV/VIS); Kinetics of the reaction of Co(C2H5)2(bipy)2ClO4 with I2 under irradiation with light at 517 nm is investigated.; EtI and Co(C2H5)I(bipy)2ClO4 are the main products, C4H10 and C2H6 are byproducts.; | A n/a B 90% |
Conditions | Yield |
---|---|
In tetrachloromethane Irradiation (UV/VIS); Irradiation at 509 nm in CCl4.; Estimation of the quantum yield of the photochemical reaction. Yield of the products estimated by g.l.c.; | A <1 B 90% C 10% |
Conditions | Yield |
---|---|
With lithium chloride; lithium hexamethyldisilazane In tetrahydrofuran at 0℃; | A 88% B n/a |
3-ethyl-2-methylnaphtho[2,1-d]thiazol-3-ium iodide
A
diethyl ether
B
ethene
C
ethyl iodide
Conditions | Yield |
---|---|
With diethyl sulfate at 100℃; for 0.5h; Product distribution; | A n/a B n/a C n/a D 87% |
With diethyl sulfate at 100℃; for 0.5h; | A n/a B n/a C n/a D 87% |
trimethylsilyl iodide
benzoic acid ethyl ester
A
trimethylsilyl benzoate
B
ethyl iodide
Conditions | Yield |
---|---|
at 100℃; for 0.5h; Mechanism; Product distribution; | A n/a B 86% |
(5S,8R,9S,10S,13R,14S,17R)-3-Ethoxy-17-((1R,4R)-4-ethyl-1,5-dimethyl-hexyl)-10,13-dimethyl-hexadecahydro-cyclopenta[a]phenanthrene
A
ethyl iodide
B
sitostanol
Conditions | Yield |
---|---|
With Methyltrichlorosilane; sodium iodide In acetonitrile at 25℃; for 36h; | A n/a B 86% |
Conditions | Yield |
---|---|
With Methyltrichlorosilane; sodium iodide In acetonitrile at 25℃; for 8h; | A n/a B 85% |
Conditions | Yield |
---|---|
In dichloromethane-d2 (N2); Re complex in CD2Cl2 was reacted with CH3CN for 24 h; monitored by (1)H- and (31)P-NMR; | A 85% B n/a C n/a D 74% |
trimethylsilyl iodide
ethyl ester of p-toluenesulfonic acid
A
4-Methyl-1-benzolsulfonsaeure-trimethylsilylester
B
ethyl iodide
Conditions | Yield |
---|---|
at 100℃; for 0.5h; Mechanism; Product distribution; | A n/a B 84% |
triethyl trithiophosphite
methyl iodide
A
S,S-diethyl methylphosphonodithiothionate
B
ethyl iodide
Conditions | Yield |
---|---|
at 20℃; for 3600h; | A 64% B 80% |
for 288h; Ambient temperature; | A 59% B n/a |
Conditions | Yield |
---|---|
With 2-chloro-4,6-dimethoxy-1 ,3,5-triazine; sodium iodide In acetone Reflux; | 80% |
2-ethoxy-ethanol
acetyl iodide
A
2-hydroxyethyl acetate
B
ethyl iodide
Conditions | Yield |
---|---|
A 79% B n/a |
Conditions | Yield |
---|---|
With Methyltrichlorosilane; sodium iodide In acetonitrile at 25℃; for 8h; | A 75% B n/a |
Conditions | Yield |
---|---|
With hydrogen iodide at 120℃; for 2h; | 72% |
With iodine; aluminium | |
With phosphorus; iodine |
Conditions | Yield |
---|---|
at 20℃; | A n/a B 71% |
Conditions | Yield |
---|---|
In tetrahydrofuran for 4h; Heating; | 100% |
In dichloromethane for 18h; Heating; | 98% |
In tetrahydrofuran at 20℃; for 1h; Cooling with ice; | 97% |
Conditions | Yield |
---|---|
With potassium carbonate In acetonitrile at 70℃; for 24h; | 100% |
With potassium carbonate In acetonitrile for 8h; Reflux; | 90% |
With sodium acetate In o-xylene for 3h; Reflux; | 74% |
1-methylquinoline-2(1H)-thione
ethyl iodide
2-ethylthio-1-methylquinolinium iodide
Conditions | Yield |
---|---|
In benzene for 6h; Heating; | 100% |
Conditions | Yield |
---|---|
With sodium hydride In N,N-dimethyl-formamide at 0 - 20℃; for 15h; | 100% |
With sodium hydroxide at 120℃; |
Conditions | Yield |
---|---|
With sodium hydroxide In ethanol at 20℃; for 15h; | 100% |
With sodium hydroxide In ethanol at 20℃; for 15h; | 100% |
With sodium hydroxide In ethanol; water for 72h; | 98% |
ethyl iodide
Dimethyl(phenyl)phosphine
dimethylethylphenylphosphonium iodide
Conditions | Yield |
---|---|
In benzene at 20℃; for 12h; Inert atmosphere; Schlenk technique; | 100% |
glyoxalic acid ethylthioacetal
ethyl iodide
2,2-bis(ethylthio)butanoic acid
Conditions | Yield |
---|---|
With oxonium; potassium hexamethylsilazane In tetrahydrofuran at 25℃; for 2.5h; Product distribution; reactant; | 100% |
(i) HN(SiMe3)2, KH, THF, (ii) /BRN= 505934/, (iii) aq. HCl; Multistep reaction; | |
With hydrogenchloride; potassium hydride; 1,1,1,3,3,3-hexamethyl-disilazane 1.) THF, 0 deg C, 15 min; THF, 25 deg C, 2.5 h.; Yield given. Multistep reaction; |
Conditions | Yield |
---|---|
With caesium carbonate In acetonitrile for 2h; Heating; | 100% |
With cesium fluoride In acetonitrile for 1h; Heating; | 99% |
With 1,8-diazabicyclo[5.4.0]undec-7-ene In benzene | |
With potassium carbonate In acetone for 16h; Heating; | |
With cesium fluoride In N,N-dimethyl-formamide at 10 - 15℃; for 24h; | 88 % Chromat. |
Conditions | Yield |
---|---|
Stage #1: indole With sodium hydride In N,N-dimethyl-formamide at 0℃; for 1h; Inert atmosphere; Stage #2: ethyl iodide for 1h; | 100% |
Stage #1: indole With sodium hydride In N,N-dimethyl-formamide; mineral oil at 0 - 20℃; Inert atmosphere; Stage #2: ethyl iodide In N,N-dimethyl-formamide; mineral oil at 0 - 20℃; Inert atmosphere; | 98% |
Stage #1: indole With sodium hydride In N,N-dimethyl-formamide; mineral oil at 0 - 20℃; for 0.5h; Stage #2: ethyl iodide In N,N-dimethyl-formamide; mineral oil at 0 - 20℃; | 98% |
2,3-dihydrobenzimidazol-2-thione
ethyl iodide
1-ethyl-2-(ethylthio)-1H-benzo[d]imidazole
Conditions | Yield |
---|---|
With sodium naphthalenide In tetrahydrofuran for 5h; Ambient temperature; | 100% |
1-(tert-butoxycarbonyl)-L-proline
ethyl iodide
(2S)-pyrrolidine-1,2-dicarboxylic acid 1-tert-butyl ester 2-ethyl ester
Conditions | Yield |
---|---|
With potassium carbonate In acetone for 16h; Ambient temperature; | 100% |
With 18-crown-6 ether; potassium carbonate In tetrahydrofuran for 21h; Inert atmosphere; Reflux; |
Conditions | Yield |
---|---|
With potassium carbonate In N,N-dimethyl-formamide at 20℃; for 72h; | 100% |
With potassium carbonate In N,N-dimethyl-formamide for 0.05h; microwave irradiation; | 90% |
With potassium carbonate In N,N-dimethyl-formamide at 20℃; for 12h; Inert atmosphere; | 90% |
Conditions | Yield |
---|---|
Stage #1: ortho-methylbenzoic acid With sec.-butyllithium In tetrahydrofuran; 1-hexene; cyclohexane at -78 - 20℃; Stage #2: ethyl iodide In tetrahydrofuran; 1-hexene; cyclohexane at -78 - 20℃; Stage #3: With hydrogenchloride; water In tetrahydrofuran; cyclohexane | 100% |
With sec.-butyllithium In cyclohexane for 8h; Ambient temperature; | 82% |
With sec.-butyllithium 1.) THF, cyclohexane, -78 deg C, 1 h, 2.) THF, cyclohexane, RT, 4 h; Yield given. Multistep reaction; |
Conditions | Yield |
---|---|
Stage #1: BOC-glycine; ethyl iodide With sodium hydride In tetrahydrofuran at 0℃; for 1h; Stage #2: In tetrahydrofuran at 0℃; | 100% |
Stage #1: BOC-glycine; ethyl iodide With sodium hydride In tetrahydrofuran at 0 - 20℃; Stage #2: With citric acid In water pH=2 - 3; | 100% |
Stage #1: BOC-glycine; ethyl iodide With sodium hydride In tetrahydrofuran at 0 - 20℃; Stage #2: With citric acid In water pH=2 - 3; | 100% |
Conditions | Yield |
---|---|
With silver perchlorate In acetonitrile for 48h; Ambient temperature; | 100% |
methyl (2-nitrophenyl)acetate
ethyl iodide
methyl 2-ethyl-2-(2-nitrophenyl)butanoate
Conditions | Yield |
---|---|
With sodium hydride In N,N-dimethyl-formamide; mineral oil at 0 - 20℃; for 4.5h; | 100% |
With potassium tert-butylate; 18-crown-6 ether In tetrahydrofuran 1) -78 deg C to RT, 2 h, 2) -78 deg C; | 76% |
Conditions | Yield |
---|---|
With dipotassium hydrogenphosphate; zinc In water; acetonitrile for 1h; | 100% |
With dipotassium hydrogenphosphate; zinc In water; acetonitrile for 1h; Product distribution; Further Variations:; Reaction partners; Reagents; Solvents; | 100% |
With sodium tetrahydroborate In acetonitrile for 0.0833333h; pH=7; pH-value; | 100% |
5-hydroxy-5-(trifluoromethyl)imidazolidine-2,4-dione
ethyl iodide
3-Ethyl-5-hydroxy-5-trifluoromethyl-imidazolidine-2,4-dione
Conditions | Yield |
---|---|
With sodium ethanolate In ethanol Ambient temperature; | 100% |
With potassium carbonate In acetone Heating; | 60 % Turnov. |
1-(tert-butoxycarbonylamino)-2,3-difluorobenzene
ethyl iodide
N-(tert-Butoxycarbonyl)-N-ethyl-2,3-difluoroaniline
Conditions | Yield |
---|---|
With sodium hydride In N,N-dimethyl-formamide for 2h; | 100% |
ethyl iodide
2-phenyl-4-ethyl-1,3,4-thiadiazol-5(4H)-one
Conditions | Yield |
---|---|
In acetonitrile for 5h; Heating; | 100% |
imidazo[1,5-a]pyridine-3-thiol
ethyl iodide
3-ethylsulfanyl-imidazo[1,5-a]pyridine
Conditions | Yield |
---|---|
With potassium carbonate In acetone at 45℃; | 100% |
With potassium carbonate In acetone at 45℃; for 12h; | |
With potassium carbonate In acetone Inert atmosphere; |
1-benzyl-3-carbethoxy-5-methyl-7-phenyl-1,4-dihydro-4-oxopyrrolo<3,4-b>pyridine
ethyl iodide
1-Benzyl-6-ethyl-5-methyl-4-oxo-7-phenyl-4,6-dihydro-1H-pyrrolo[3,4-b]pyridine-3-carboxylic acid ethyl ester
Conditions | Yield |
---|---|
With sodium methylate In N,N-dimethyl-formamide r.t., overnight; | 100% |
Conditions | Yield |
---|---|
With triethylamine In dichloromethane at 20℃; for 6h; | 100% |
With N-ethyl-N,N-diisopropylamine In acetone at 20℃; for 0.333333h; Sonication; | 90% |
With potassium hydroxide In 1,4-dioxane at 70℃; for 1.5h; | 58% |
ethyl iodide
2-methyl-3-trifluoroacetylpyrrole
1-ethyl-3-trifluoroacetyl-2-methylpyrrole
Conditions | Yield |
---|---|
With potassium hydroxide In dimethyl sulfoxide at 40℃; for 20h; | 100% |
ethyl iodide
(S)-2-hydroxy-4-pentenoic acid
(S)-3-hydroxy-4-pentenoic acid ethyl ester
Conditions | Yield |
---|---|
With sodium hydrogencarbonate In N,N-dimethyl-formamide for 5h; | 100% |
ethyl iodide
3-trifluoroacetyl-2-phenylpyrrole
1-ethyl-3-trifluoroacetyl-2-phenylpyrrole
Conditions | Yield |
---|---|
With potassium hydroxide In dimethyl sulfoxide at 70℃; for 20h; | 100% |
Conditions | Yield |
---|---|
With sodium hydride In acetonitrile at 0℃; for 7h; | 100% |
With sodium methylate In methanol for 6h; Reflux; | 97% |
Stage #1: 2-amino-benzenethiol With potassium tert-butylate In ethanol at 0℃; for 0.75h; Stage #2: ethyl iodide In ethanol at 0 - 20℃; for 0.75h; Further stages.; | 85% |
ethyl iodide
Conditions | Yield |
---|---|
In acetonitrile for 0.366667h; | 100% |
ethyl iodide
O,O-diethyltrimethylsilylchloromethylphosphonate α-lithie
(1-Chloro-1-trimethylsilanyl-propyl)-phosphonic acid diethyl ester
Conditions | Yield |
---|---|
In tetrahydrofuran; hexane for 1h; Ambient temperature; | 100% |
ethyl iodide
4,6-dimethyl-1-phenyl-2-oxopyrimidine
4-methyl-1-phenyl-6-propylpyrimidin-2(1H)-one
Conditions | Yield |
---|---|
With sodium hydride In N,N-dimethyl-formamide for 1h; | 100% |
Reported in EPA TSCA Inventory.
The Ethane, iodo-, with the CAS registry number 75-03-6, is also known as Monoiodoethane. Its EINECS number is 200-833-1. This chemical's molecular formula is C2H5I and molecular weight is 155.97. What's more, its systematic name is iodoethane. Its classification code is Mutation data. Ethyl iodide is very good with alkylation reactions. It is used as organic reagents and pharmaceutical intermediates. It is also used as the hydrogen radical promoter. It should be sealed and stored in a cool, ventilated and dry place. Moreover, it should be protected from light, heat and fire.
Physical properties of Ethane, iodo- are: (1)ACD/LogP: 2.03; (2)# of Rule of 5 Violations: 0; (3)ACD/LogD (pH 5.5): 2.03; (4)ACD/LogD (pH 7.4): 2.03; (5)ACD/BCF (pH 5.5): 20.48; (6)ACD/BCF (pH 7.4): 20.48; (7)ACD/KOC (pH 5.5): 302.23; (8)ACD/KOC (pH 7.4): 302.23; (9)Index of Refraction: 1.516; (10)Molar Refractivity: 24.28 cm3; (11)Molar Volume: 80.3 cm3; (12)Polarizability: 9.62×10-24cm3; (13)Surface Tension: 28.5 dyne/cm; (14)Density: 1.94 g/cm3; (15)Flash Point: 21.1 °C; (16)Enthalpy of Vaporization: 29.44 kJ/mol; (17)Boiling Point: 72.8 °C at 760 mmHg; (18)Vapour Pressure: 128 mmHg at 25°C.
Preparation: this chemical can be prepared by ethanol and PI3 by heating and reflux.
2P + 3I2 → 2PI3
3C2H5OH + PI3 →3CH3CH2I + H3PO4
Uses of Ethane, iodo-: it can be used to produce 1-ethyl-3-nitro-2-phenyl-indole by heating. It will need reagent Na and solvent ethanol with the reaction time of 2 hours. The yield is about 59%.
When you are using this chemical, please be cautious about it as the following:
This chemical is flammable, so you should keep it away from sources of ignition - No smoking. It is harmful by inhalation. It is toxic by inhalation, in contact with skin and if swallowed. It is irritating to eyes, respiratory system and skin. In case of contact with eyes, you should rinse immediately with plenty of water and seek medical advice. You must not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). You should take off immediately all contaminated clothing. When using it, you need wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, you must seek medical advice immediately (show the label where possible).
You can still convert the following datas into molecular structure:
(1)InChI: InChI=1S/C2H5I/c1-2-3/h2H2,1H3
(2)InChIKey: HVTICUPFWKNHNG-UHFFFAOYSA-N
(3)Canonical SMILES: CCI
The toxicity data is as follows:
Organism | Test Type | Route | Reported Dose (Normalized Dose) | Effect | Source |
---|---|---|---|---|---|
guinea pig | LD50 | intraperitoneal | 322mg/kg (322mg/kg) | "Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure," Izmerov, N.F., et al., Moscow, Centre of International Projects, GKNT, 1982Vol. -, Pg. 68, 1982. | |
mouse | LD50 | intraperitoneal | 560mg/kg (560mg/kg) | "Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure," Izmerov, N.F., et al., Moscow, Centre of International Projects, GKNT, 1982Vol. -, Pg. 68, 1982. | |
mouse | LD50 | subcutaneous | 1gm/kg (1000mg/kg) | PERIPHERAL NERVE AND SENSATION: FLACCID PARALYSIS WITHOUT ANESTHESIA (USUALLY NEUROMUSCULAR BLOCKAGE) LUNGS, THORAX, OR RESPIRATION: RESPIRATORY STIMULATION LUNGS, THORAX, OR RESPIRATION: OTHER CHANGES | Japanese Journal of Pharmacology. Vol. 3, Pg. 99, 1954. |
rabbit | LDLo | oral | 300mg/kg (300mg/kg) | "Patty's Industrial Hygiene and Toxicology," 3rd rev. ed., Clayton, G.D., and F.E. Clayton, eds., New York, John Wiley & Sons, Inc., 1978-82. Vol. 3 originally pub. in 1979; pub. as 2n rev. ed. in 1985.Vol. 2B, Pg. 3487, 1981. | |
rat | LC50 | inhalation | 65gm/m3/30M (65000mg/m3) | Fiziologicheski Aktivnye Veshchestva. Physiologically Active Substances. Vol. 7, Pg. 35, 1975. | |
rat | LD50 | intraperitoneal | 330mg/kg (330mg/kg) | "Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure," Izmerov, N.F., et al., Moscow, Centre of International Projects, GKNT, 1982Vol. -, Pg. 68, 1982. |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View