Product Introduction: 6N tin, 99.9999% tin particles (Sn) 7440-31-5 High purity tin (Sn) Tin Overview Purpose: Mainly used for preparing group compound semiconductors (such as PbxSn1-xTe), high-purity alloys, ultra-low temperature cooling alloys
DayangChem exported this product to many countries and regions at best price. If you are looking for the material's manufacturer or supplier in China, DayangChem is your best choice. Pls contact with us freely for getting detailed product spe
Cas:7440-31-5
Min.Order:1 Kilogram
FOB Price: $3.0
Type:Lab/Research institutions
inquiryItems Inspection results Impurity content (ppm) Cu:0.2 Bi:0.1 Zn:0.2 Fe:0.2 As:0.1 Pb:
Cas:7440-31-5
Min.Order:1 Gram
FOB Price: $100.0 / 500.0
Type:Manufacturers
inquiryThe above product is Ality Chemical's strong item with best price, good quality and fast supply. Ality Chemical has been focusing on the research and production of this field for over 14 years. At the same time, we are always committed to providi
1. Factory price and high quality must be guaranteed, base on 8 years of production and R&D experience2. Free samples will be provided,ensure specifications and quality are right for customer3. Customers will receive the most professional technical s
Cas:7440-31-5
Min.Order:1 Gram
FOB Price: $0.1
Type:Manufacturers
inquiryOur main production base is located in Xuzhou industry park. We are certified both to the ISO 9001 and ISO 14001 Standards, have a safety management system in place.Our R&D team masters core technology for process-design of target building block
Cas:7440-31-5
Min.Order:5 Kiloliter
FOB Price: $1.2 / 5.0
Type:Manufacturers
inquiry1. good quality 2. competitive price 3. prompt shipment 4. best service Application:used for reagent analysis, industry,etc. Port:By sea, air and courier
TIN Basic information Product Name: TIN Synonyms: STANNUM;TITRISOL TIN(IV);TIN ORE CONCENTRATE;TIN POWDER;TIN SINGLE ELEMENT PLASMA STANDARD;TIN SINGLE ELEMENT STANDARD;TIN STANDARD;TIN
Cas:7440-31-5
Min.Order:1 Gram
Negotiable
Type:Lab/Research institutions
inquiryWith our good experience, we offer detailed technical support and advice to assist customers. We communicate closely with customers to establish their quality requirements. Consistent Quality Our plant has strict quality control in each manufacturin
Cas:7440-31-5
Min.Order:1 Gram
FOB Price: $6.0 / 9.0
Type:Trading Company
inquiryWITH US,YOUR MONEY IN SAFE,YOUR BUSINESS IN SAFE 1)Quick Response Within 12 hours; 2)Quality Guarantee: All products are strictly tested by our QC, confirmed by QA and approved by third party lab in China, USA, Canada, Germany, UK, Italy, France et
Cas:7440-31-5
Min.Order:1 Kilogram
FOB Price: $139.0 / 210.0
Type:Trading Company
inquiry1. Product advantages ♦ High purity, all above 98.5%, no impurities after dissolution ♦ We will test each batch to ensure quality ♦ OEM and private brand services designed for free ♦ Various cap colors available ♦ W
Cas:7440-31-5
Min.Order:1 Kilogram
FOB Price: $10.0 / 20.0
Type:Trading Company
inquiryName: Tin powder Synonyms: Tin CAS:7440-31-5 MF: Sn Appearance: Grey green powder Storage:Store in cool and dry place, away from sun light. Package: 25kgs/drum Application:Powder Metallurgy, Bearing Transportation:By sea or by air Port:Qi
1.No Less 8 years exporting experience. Clients can 100% received goods 2.Lower Price with higher quality 3,Free sample 4,We are sincerely responsible for the "product quality" and "After Service" Upbio is Specialized
Tin Basic information Introduction Chemical Properties Physical Properties Uses Production Reactions Product Name: Tin Synonyms: Sn-HWQ;Sn-S 200;Sn-S-HWQ;TEGO 30;TEGO 60;Tin element;Tin Paste 62-1177;W-Sn CAS: 7440-31-5 MF: Sn MW: 118.
Tin CAS:7440-31-5 Qingdao Belugas Import and Export Co., Ltd. is a scientific and technological company integrating research and development, production and trade of chemical intermediates, specializing in high quality organic intermediates, steroid
Hello, dear friend! I'm Hansen and Allen from China. Welcome to my lookchem mall! The following is a brief introduction of our company's products and services. If you are interested in our products, please contact us by emai
Located in Wuhan City of Hubei Province, Wuhan Rison Trading co., Ltd is engaged in the supply of fine specialty chemicals. Our business includes metal surface treatment, such as nickel/zinc/copper plating, perfluoro chemicals, tin salts (stannous su
Cas:7440-31-5
Min.Order:3000 Kilogram
FOB Price: $10.0 / 100.0
Type:Other
inquiryHenan Wentao Chemical Product Co.,Ltd is Located in Zhengzhou High-tech Development Zone with import and export license, We passed ISO 9001:2008 as well, Henan Wentao has developed more than 1000 compounds, which are widely used in the fields of prod
Tin CAS: 7440-31-5 Specification Item Standard Test Results Identification A.H-NMR:Comply with the structure Complies B.LC-MS:Comply with the structure
1. Timely and efficient service to ensure communication with customers 2. Produce products of different specifications and sizes according to your requirements. 3. Quality procedures and standards recognized by SGS. Advanced plant equipment ensures
Hangzhou KeyingChem Co., Ltd. exported this product to many countries and regions at best price. If you are looking for the material’s manufacturer or supplier in China, KeyingChem is your best choice. Pls contact with us freely for getting det
J&H CHEM R&D center can offer custom synthesis according to the contract research and development services for the fine chemicals, pharmaceutical, biotechnique and some of the other chemicals. J&H CHEM has some Manufacturing base in Jia
Massive Chemical is certified with ISO9001 and ISO14001 manufacturer for this product. We will offer all documents as requirement for the materials which includes, Certificate of Analysis, Material Safety Data Sheet, and Method of Analysis and
Zibo Hangyu Biotechnology Development Co., Ltd is a leading manufacturer and supplier of chemicals in China. We develop produce and distribute high quality pharmaceuticals, intermediates, special chemicals and OLED intermediates and other fine chemi
Superior quality, moderate price & quick delivery. Appearance:white powder Storage:Stored in cool, dry and ventilation place; Away from fire and heat Package:10g/bag,or as your request Application:Used as Pharmaceutical Intermediates Transporta
Our Advantages A. International Top level TechnologyOur company owned biomedicine experts are famous at home and abroad with rich experience in research and development in the field of efficient chiral functional molecules research and development an
factory?direct?saleAppearance:White Powder Storage:Store In Dry, Cool And Ventilated Place Package:25kg/drum, also according to the clients requirement Application:It is widely used as a thickener, emulsifier and stabilizer Transportation:By Sea Or B
Cas:7440-31-5
Min.Order:1 Kilogram
FOB Price: $18.0 / 20.0
Type:Trading Company
inquiry7440-31-5 Appearance:95%+ Package:R&D,Pilot run Application:7440-31-5 Transportation:per client require Port:Express ,Air, Sea
High quality, competitive price, fast delivery and first-class service we possesses have won the trust and praise of customers. Standard: BP/USP/EP The purity is equal or greater than 99%. As a supplier, we can provide high-quality products. Cle
Cas:7440-31-5
Min.Order:1 Metric Ton
FOB Price: $1.0
Type:Lab/Research institutions
inquiryZhenyu biotech exported this product to many countries and regions at best price. if you are looking for the material's manufacturer or supplier in china, zhenyu biotech is your best choice. pls contact with us freely for getting detailed
Cas:7440-31-5
Min.Order:1 Kilogram
FOB Price: $2.0
Type:Lab/Research institutions
inquiryA
tin
B
{((CH3)3Si)2NSnCl2NSi(CH3)3}2C6H4
Conditions | Yield |
---|---|
In diethyl ether; benzene-d6 7 d at 20°C; | A n/a B 100% |
tin
Conditions | Yield |
---|---|
With aluminium In neat (no solvent) byproducts: Al2O3; reaction of SnO2 and Al to Sn and Al2O3 after passing in over a blower flame;; | 96% |
With Al In neat (no solvent) byproducts: Al2O3; reaction of SnO2 and Al to Sn and Al2O3 after passing in over a blower flame;; | 96% |
With carbon monoxide In neat (no solvent) intermediate formation of solid SnO at reduction with CO at 600-850°C;; |
tin
Conditions | Yield |
---|---|
With iron In not given pptn.; no Sb, no As, 0.16% Fe, 0.053% Al; | 95% |
With Fe In not given pptn.; no Sb, no As, 0.16% Fe, 0.053% Al; | 95% |
With hydrogenchloride; aluminium In hydrogenchloride leaching (HCl soln.) at ambient temp.; pptn. (Al plates); washing; melting; content: 0.89% Sb, 0.036% As, 0.022% Fe, 0.024% Al; | 94.5% |
With HCl; Al In hydrogenchloride leaching (HCl soln.) at ambient temp.; pptn. (Al plates); washing; melting; content: 0.89% Sb, 0.036% As, 0.022% Fe, 0.024% Al; | 94.5% |
tin
Conditions | Yield |
---|---|
With chromium In melt byproducts: CrF2; | 95% |
In hydrogen fluoride Electrolysis; Pt cathode, Sn anode; 29-30°C, 1 A/dm**2 with different additives; | |
With lithium fluoride In neat (no solvent) byproducts: Li3VF6; formation of Sn and Li3VF6 in a mixture with LiF with metallic V;; |
Conditions | Yield |
---|---|
at 40℃; for 16h; Temperature; | 95% |
dibutyltin dibenzoate
A
tin
C
(Benzoyloxy)tributylstannan
D
dibutyltin
E
cyclopenta-1,3-diene
Conditions | Yield |
---|---|
In toluene molar ratio Cp2V/Sn-compound 1/2, sealed ampoule, 20°C, 24 h; | A n/a B 94% C n/a D n/a E 84% |
Conditions | Yield |
---|---|
In tetrahydrofuran a soln. of Sn compd. added to a soln. of ligand at room temp.; filtered, crystd. at room temp. for 1 h; elem. anal.; | A n/a B 94% |
1,2-dimethoxyethane
diphenyltin(IV) dichloride
A
tin
B
YbCl2(tetrahydrofuran)2
Conditions | Yield |
---|---|
In tetrahydrofuran absence of air; stirring (room temp., 12 h), evapn. (vac.), dissoln. in DME, then 10 h (room temp.); crystn. (-10°C, 24 h); elem. anal.; | A 81.94% B 92.54% C 75.39% |
Conditions | Yield |
---|---|
With THF In tetrahydrofuran absence of air; stirring (room temp., 30 h); filtration off of YbCl2(THF)2 and Sn, evapn. (vac.), washing (hexane), recrystn. (THF); | A 52.75% B 65.59% C 89.53% |
bis(pentamethylcyclopentadienyl)Sn
tin
Conditions | Yield |
---|---|
With potassium In tetrahydrofuran byproducts: pentamethylcyclopentadiene; a stoich. amt. of cut-up K was added under Ar to a soln. of stannocene in THF, mixt. was stirred at room temp. for 45 min; no initial stannocene was observed after the reaction; solvent was evapd., residue was extd. with petroleum ether, ext. was analyzed for remaining stannocene by (1)H NMR, insoluble material was treated with MeOH, elemental Sn was filtered and dried, soln. was examined for C5Me5H spectroscopically; | 89% |
With sodium In tetrahydrofuran byproducts: pentamethylcyclopentadiene; a stoich. amt. of cut-up Na was added under Ar to a soln. of stannocene in THF, mixt. was stirred at room temp. for 25 h; no initial stannocene was observed after the reaction; solvent was evapd., residue was extd. with petroleum ether, ext. was analyzed for remaining stannocene by (1)H NMR, insoluble material was treated with MeOH, elemental Sn was filtered and dried, soln. was examined for C5Me5H spectroscopically; | 81% |
With lithium In tetrahydrofuran byproducts: pentamethylcyclopentadiene; a stoich. amt. of cut-up Li was added under Ar to a soln. of stannocene in THF, mixt. was stirred at room temp. for 7 d; 63% of initial material remained unchanged; solvent was evapd., residue was extd. with petroleum ether, ext. was analyzed for remaining stannocene by (1)H NMR, insoluble material was treated with MeOH, elemental Sn was filtered and dried, soln. was examined for C5Me5H spectroscopically; | <1 |
Conditions | Yield |
---|---|
In 1,2-dimethoxyethane Irradiation (UV/VIS); under Ar; mole ratio NaBPh4 : SnCl2 = 2 : 1; irradn. (254 nm) for 8 h gave deposition of Sn; deposit sepd., washed with acetone and water, and dried in vac. to give pure Sn; | 80% |
Conditions | Yield |
---|---|
In melt placing of mixt. of Si with SnF2 (molar ratio SnF2:Si=2.00) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.00 h at 250°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 76.8% B n/a |
trimethyltin(IV)chloride
A
tin
B
hexamethyldistannane
C
trimethylstannane
Conditions | Yield |
---|---|
With NdI2; THF In tetrahydrofuran Me3SnCl in THF added under stirring at -60°C to NdI2 in THF; warmed to room temp.; stirred for 30 min; filtered off; dried; dissolved in water again; analyzed by GLC; | A 74% B 11% C 7% |
Conditions | Yield |
---|---|
In tetrahydrofuran a soln. of Sn compd. added to a soln. of ligand at -78°C; filtered, evapd. (vac.), dissolved in MeCN, crystd. at room temp. for 1 h; elem. anal.; | A n/a B 72% |
dibutyltin dibenzoate
A
tin
C
(Benzoyloxy)tributylstannan
D
cyclopenta-1,3-diene
Conditions | Yield |
---|---|
In toluene molar ratio Cp2V/Sn-compound 1/1, sealed ampoule, 20°C, 24 h; ppt. of V-complex washing (toluene), drying; elem. anal.; solvent removal, fractioning; | A n/a B 67% C 28% D 37% |
Conditions | Yield |
---|---|
In melt placing of mixt. of Zr with SnF2 (molar ratio SnF2:Zr=2.10) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.50 h at 240°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 66.5% B n/a |
Conditions | Yield |
---|---|
byproducts: H2; 400°C for 4 h in closed tube; | A n/a B 57% C 4% D 21.5% |
other Radiation; X-ray; | |
Irradiation (UV/VIS); 80°C; |
tin
Conditions | Yield |
---|---|
With sodium stannate(II) at 20℃; for 120h; | 54% |
With sodium hydroxide In sodium hydroxide Electrochem. Process; Sn electrodeposition from soln. of SnO in 4 M NaOH on Sn working electrode; Pt counter electrode, Ag/AgCl/satd. KCl reference eelctrode; | |
With silicon In neat (no solvent) Electric Arc; redn. of SnO by Si;; |
sodium tetraphenyl borate
copper(ll) bromide
A
tin
B
copper
Conditions | Yield |
---|---|
In 1,2-dimethoxyethane Irradiation (UV/VIS); under Ar; mole ratios NaBPh4 : SnCl2 : CuBr2 = 4 : 1 : 1; irradn. (254 nm) for 14 h gave deposition of Co and Cu; | A 49% B 49% |
tri-n-butyl-tin hydride
13,13-Dimethyl-1,10-diphenyl-13-silatricyclo<8.2.1.0Δ2,9>trideca-11-en
A
tin
B
bis(tri-n-butyltin)
C
tetra-n-butyltin(IV)
D
(tri(n-butyl)stannyl)dimethylsilane
Conditions | Yield |
---|---|
In neat (no solvent) (Ar); 2.5 h at 200°C; dissolved (C6D6); Sn septd.; not isolated; detected by NMR; gas chromatography; | A 14% B 10% C <1 D 45% |
carbon oxide sulfide
bis(bis(trimethylsilyl)amido)tin(II)
A
tin
B
Sn4(μ4-O)(μ2-OSiMe3)5(η1-N=C=S)
Conditions | Yield |
---|---|
In hexane byproducts: ((CH3)3Si)2NH, (CH3)3SiOSi(CH3)3, (CH3)3SiNCS; (Ar); soln. of tin complex in hexane was placed in bomb at -100°C, OCS was added, stirred and warmed to 25°C, stirred overnight; cooled to -78°C excess OCS was removed in vac., filtered, washed with pentane, crystal were obtained from filtrate, elem. anal.; | A n/a B 39% |
Conditions | Yield |
---|---|
In melt placing of mixt. of V with SnF2 (molar ratio SnF2:V=2.68) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.50 h at 240°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 21.6% B n/a |
Conditions | Yield |
---|---|
In melt placing of mixt. of Nb with SnF2 (molar ratio SnF2:Nb=6.42) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.50 h at 240°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 19.8% B n/a |
Conditions | Yield |
---|---|
In melt Kinetics; placing of mixt. of Ti with SnF2 (molar ratio SnF2:Ti=4.04) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.00 h at 230°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 13.8% B n/a |
Conditions | Yield |
---|---|
In melt placing of mixt. of Ta with SnF2 (molar ratio SnF2:Ta=1.46) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.00 h at 240°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 9.2% B n/a |
Conditions | Yield |
---|---|
With KC8 In tetrahydrofuran add. of Cr(CO)6 to a suspension of KC8 under Ar at -70°C, stirring (-70°C, 1 h; 0°C, 2 h), addn. of anhydr. SnCl2 at -70°C, addn. of cryptand after 0.5 h stirring, warming to 0°C; filtn. through Kieselgur, concg. in high-vac., layering (15°C, Et2O, pentane), after 7 days Sn seperates; | A n/a B n/a C 7% |
Conditions | Yield |
---|---|
In melt placing of mixt. of Cr with SnF2 (molar ratio SnF2:Cr=2.05) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.75 h at 230°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 6.8% B n/a |
tin
Conditions | Yield |
---|---|
In melt in presence of WO3; | 1.5% |
In melt in presence of WO3; | 1.5% |
With anthracite 850-900°C; |
Conditions | Yield |
---|---|
In melt placing of mixt. of Al with SnF2 (molar ratio SnF2:Al=1.65) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.00 h at 250°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 1.5% B n/a |
Conditions | Yield |
---|---|
SnO was oxidized at 612-1030 K; | A 1% B n/a |
Conditions | Yield |
---|---|
With {(C2H5)4N}Br In acetonitrile Electrolysis; Sn-cathode, 50°C; | 100% |
With {(C2H5)4N}Br In acetonitrile Electrolysis; Sn-cathode, 50°C; | 100% |
In water; acetonitrile Electrolysis; Sn-cathode, Pt-anode, 0.25 M Et4NClO4 in MeCN/water=7:1, 25°C, 10mA/cm**(-2); gas chromy.; |
Conditions | Yield |
---|---|
In further solvent(s) High Pressure; prepd. under solvothermal conditions; reactants weighted in ratio of 1 Ni:1 Sn:3 S, heated in sealed Teflon-lined steel autoclave in pure 1,2-diaminopropane for 7 d at 140°C; elem. anal.; | 100% |
Conditions | Yield |
---|---|
at 250 - 650℃; for 20h; Sealed tube; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 550 - 950℃; for 240h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 350 - 950℃; for 240h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
at 590 - 900℃; for 120h; Inert atmosphere; | 100% |
Conditions | Yield |
---|---|
Stage #1: bismuth; tin; lithium sulfide; sulfur at 800℃; under 0.00150015 Torr; for 10h; Inert atmosphere; Glovebox; Sealed tube; Stage #2: at 800℃; for 26h; | 100% |
tin
1-methyl-3-octylimidazolium tribromide
Conditions | Yield |
---|---|
at 125℃; for 72h; Schlenk technique; | 100% |
tin
n-Butyl chloride
A
dibutyltin chloride
B
tributyltin chloride
Conditions | Yield |
---|---|
With catalyst: dicyclohexyl-18-crown-6/n-C4H9I In N,N-dimethyl-formamide 120°C; 24 h; excess KI;; analyzed by GLC;; | A 99% B 1% |
With catalyst: dibenzo-18-crown-6/n-C4H9I In N,N-dimethyl-formamide 120°C; 24 h; excess KI;; analyzed by GLC;; | A 98% B 2% |
With catalyst: dibenzo-18-crown-6/n-C8H17I In N,N-dimethyl-formamide 120°C; 24 h; excess KI;; analyzed by GLC;; | A 98% B 2% |
Conditions | Yield |
---|---|
With hydrogenchloride In water at 170℃; Inert atmosphere; | 99% |
1260°C; | |
I2 in H2 stream; |
Conditions | Yield |
---|---|
With oxygen In dimethyl sulfoxide metal. Sn under O2 atm. treated with DMSO and triflic acid (4 equiv.) in3 portions, heated at 100°C for 24 h; | 99% |
Conditions | Yield |
---|---|
With oxygen In dimethyl sulfoxide metal. Sn under O2 atm. treated with DMSO and triflimidic acid (4 equiv.) in 3 portions, heated at 100°C for 7 h; | 99% |
Conditions | Yield |
---|---|
In neat (no solvent) mixt. of Ba, Sn, Se in stoich. ratio 2:1:5 was placed into fused silica tube; sealed under vac.; put into furnace; heated to 750°C within3 ds; kept at 750°C for 4 ds; cooled to 700°C within 10 m in; annealed at 650°C for 4 ds; cooled to room temp. within 4 ds; | 99% |
Stage #1: selenium; tin; barium at 750℃; for 150h; Sealed tube; Stage #2: at 650℃; for 100h; |
Conditions | Yield |
---|---|
In neat (no solvent, solid phase) mixt. of Sm, Ni, Sn loaded into Ta tube, heated at 970°C for 36 h, quenched in water, annealed at 700°C for 15 d; | 99% |
In neat (no solvent, solid phase) mixt. of Sm, Ni, Sn loaded into Nb tube, heated under dynamic vac. at 300°C for 1 d, heated at 950°C for 5 d, cooled to room temp.at 15°C/h; |
Conditions | Yield |
---|---|
In toluene; acetonitrile under dry N2, finely divided metal and o-quinone refluxed in toluene (24 h), filtration, addn. of Et4NBr in minimum amount of CH3CN (light-brown solid deposit), stirred (2 h, room temp.), addn. of diethyl ether, pptn.; filtration, evapn.; elem. anal.; | 99% |
Conditions | Yield |
---|---|
In toluene; acetonitrile under dry N2, finely divided metal and o-quinone refluxed in toluene (24 h), filtration, addn. of Ph4PCl in minimum amount of CH3CN (light-brown solid deposit), stirred (2 h, room temp.), addn. of diethyl ether, pptn.; filtration, evapn.; elem. anal.; | 99% |
Conditions | Yield |
---|---|
With lithium chloride In further solvent(s) Electrolysis; (N2 or Ar); using of Sn as anode and stainless steel plate as cathode; electrolysis for 1-1.5 h with soln. of electrolyte LiCl in MeOCH2CH2OH; removal of methyl cellosolve in vac., sepn. from LiCl by extn. with toluene; distn. in vac.; elem. anal.; | 99% |
Electrochem. Process; Dissolution of Sn anode at 110-220 V and 0.2-0.5 A.; Elem. anal.; |
Conditions | Yield |
---|---|
In neat (no solvent) mixt. Cs2Se, Sn, As2S3, and Se was heated at 500°C for 4 days andthen cooled to 250°C at rate 5°C/h followeed by rapid coo ling to room temp.; products were washed with DMF and ether; | 99% |
In neat (no solvent) mixt. Cs2Se, Sn, As2S3, and Se was heated at 550°C for 4 days andthen cooled to 250°C at rate 5°C/h followeed by rapid coo ling to room temp.; products were washed with DMF and ether; |
tin
copper
Conditions | Yield |
---|---|
at 399.84 - 699.84℃; for 408h; Sealed tube; | 98% |
In melt sealed in evacuated quartz ampoule; placed in vertical furnace; heated to 1150°C at 40°C/h; kept for 24 h, cooled at 10°C/hto 800°C, at 1°C/h to 640°C, to 500°C at 5. degree.C/h, annealed for 120 h; | |
In neat (no solvent) vac; 1350 K; |
Conditions | Yield |
---|---|
In toluene 1.5 equiv. of disulfide, 0.5 equiv. of I2 and Sn metal were refluxed in toluene for 4 h; mixt. was filtered through Celite, soln. was concd. in vac., cooled in ice-bath, solid was filtered off, washed with petroleum ether (60-80 °C), dried in vac., elem. anal.; | 98% |
About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia
Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog
©2008 LookChem.com,License: ICP
NO.:Zhejiang16009103
complaints:service@lookchem.com Desktop View